Well today we set all but 4 blocks. Yeah...almost done. Then the REAL digging starts.
When our ground was dug, the bobcat didn't get it perfectly level which we expected that due to the ruts it creates.
Now when we put in our first block, we used the one that seemed at the lowest point and dug it into the ground level with the surface. We used that block to level the rest with the transit. WOW the high spots are unbelievable. We have some blocks that are probably 6 inches in the dirt. Granted that they are level
but they are deep. It seems the center is higher than the ends.

That is too much dirt to shovel out with hand shovels, plus it is hard compacted clay, so we are gonna get my dads rototiller to break it up and then screed and shovel out the loose dirt.

Any other ideas???
Sorry no pics but we are so filthy from head to toe when we are done.

Has anyone else ran into this problem? If so how did you deal with it?

Thanks
Rhon