Hi Dennis,
Thanks for the compliments. We still have to dig those blocks into the ground then laser level them.
We needed to see where they are going exactly so what we did was set up all the rails in the bottom plates as if we were actually going to install the wall.

Now that we know that the blocks are where they need to go...they will be dug into the ground then laser leveled. From that point, it will be easy to level between the blocks or use crusher run if necessary.
Also any more high spots in the actual pool area will be easy to take down as well since we can use the level blocks as a guide.

The picture does look deceiving though probably because I was standing at the higher ground behind the fence and shooting downward.

It is only 6:00 pm now and I wanna get some blocks into the ground because our neighbor is lending us his transit. We really feel fortunate to have Tom as our neighbor. He has been very generous with his equipment and his very expensive tools. Not to mention his time.

Anyways...more pictures to follow. Back to work I go.

Thanks again,
Rhonda