Closed Thread
Results 1 to 10 of 13

Thread: pools

Hybrid View

  1. #1
    beary is offline Registered+ Thread Analyst beary 0
    Join Date
    Dec 2005
    Location
    .
    Posts
    61

    Default Re: pools

    Gunite actually is easier to shape a pool to your dreams and desires. You can’t do that with liner kits and it cost a lot if you call a liner pool company to modify the steel sidings. But gunite allows you to make custom shape the pool and add any swimouts, benches, beach entries, and waterfalls to your hearts desire. Gunite cost a little more, but I'm confident you will like its advantages.

    If you want to use the best subcontractors, then I suggest building the pool in the fall and winter because you won't be able to get the better crews in the spring when everyone else, like us, are building their pools. There are dozens of pool subcontractors in our area, but I quickly learned that only a few have a good reputation and they are scheduled three months ahead. Now your area might be different, so that is another question I would ask, our Pool company had to make some deals just to get the excavator he likes best to come out and dig our pool on Saturday. They were not happy about it either. You or I could never have that kind of pull.

    Beary

  2. #2
    Join Date
    Jul 2006
    Posts
    28

    Default Re: pools

    Hey there

    I am pretty good with plumbing & wiring too ...just about to put water in my pool....took a month off from work to build it...like to do things myself. ITs done but I wish I didnt....well maybe not....well....we'll see once the water goes in.

    If you do it you will need a thorough knowledge of codes if you are putting underground gas water, electric, pool lights....way more complex than I knew and I am a GC. When the rubber hits the road, the elec & plumber earn their $.

    Plan some nice weather too....

  3. #3
    Join Date
    Jul 2006
    Posts
    14

    Default Re: pools

    Quote Originally Posted by topnotch
    Hey there

    I am pretty good with plumbing & wiring too ...just about to put water in my pool....took a month off from work to build it...like to do things myself. ITs done but I wish I didnt....well maybe not....well....we'll see once the water goes in.

    If you do it you will need a thorough knowledge of codes if you are putting underground gas water, electric, pool lights....way more complex than I knew and I am a GC. When the rubber hits the road, the elec & plumber earn their $.

    Plan some nice weather too....
    Where I worry the most is trowling and the dig. I know it has to be right or there is a big mess.
    Where I live there are no plumbing codes(country). Besides water flows downhill,,,,right?. lol and I have some friends that will tell me code for underground electric here. I can easily do that work. As stated above, I did my own electrical and plumbing in my house I reside in.

    I think I am going to look into charges for excavating, a person that can do the troweling and a good concrete man. Those are the main areas that really have no experience in except minor things. I have at least a month off next summer so there is no excuse not to try and do it myself.

    Thanks guys. I will continue to ask questions I am sure so I can get info from You guys on good equipment

  4. #4
    keithw is offline Registered+ Thread Analyst keithw 0
    Join Date
    May 2006
    Posts
    64

    Default Re: pools

    Archer,

    I would consider a fiberglass pool if I were you. You can cut a deal directly with the manufacturer and save a lot of money on the shell. They supply complete digging and installation plans. The pools come already plumbed with skimmers and returns. If you are so inclined, you could even dig the hole yourself, it's really not that hard. I did mine completely including the dig. All I had to contract out was a dump truck to be there to load dirt into. Fiberglasss is more expensive for the shell than a vinyl kit but much easier to install and maintain and you'll never have to replace a liner. The digging requirements are not precise because you backfill under and around the pool with sand. All you really have to make sure of is the slope of the bottom.

    There are a number of good fiberglass pool companies who make 8ft deep pools, and you can get them in a ton of different shapes. CPC, Viking, and San Juan are well respected. I've priced the 8ft deep shells out for around 10-12k.

  5. #5
    Join Date
    Dec 1969
    Location
    the woodlands, texas.
    Posts
    82

    Default Re: pools

    Building your own pool isn't that hard if your mechanically inclined.
    Whether your in an area which has building codes or not, your most well served by adhering to them. The last thing you'd want to do is, upon sale of the property, be forced to bring the improvement into compliance because the buyers inspector found things that didn't meet code.
    I build lots of pools in unincorporated areas where there is no enforcement of building codes. These standard were adopted for your protection.

    See Ya,
    Kelly

Closed Thread

Similar Threads

  1. Radiant Pools and EZ Panel Pools
    By poolmaster in forum --cleanup--
    Replies: 3
    Last Post: 10-04-2012, 02:06 PM
  2. hi new to pools sorry
    By Gibby in forum Dealing with Algae & Slime
    Replies: 1
    Last Post: 09-08-2012, 10:48 PM
  3. DIY Pools
    By TDonald in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 06-13-2012, 11:29 AM
  4. Very new to pools
    By Riven in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 06-09-2012, 12:10 PM
  5. Are 27' pools exactly 27'??????
    By scootchu in forum Above-Ground Pool Construction & Repair
    Replies: 4
    Last Post: 08-09-2006, 07:23 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts