+ Reply to Thread
Results 1 to 10 of 13

Thread: New SWG, High CYA???

Hybrid View

  1. #1
    kathgilliam is offline ** No working email address ** kathgilliam 0
    Join Date
    Dec 1969
    Location
    Jersey Village, Texas
    Posts
    34

    Default Re: New SWG, High CYA???

    Well, I've spoken to the former owner and she said when she filled the pool after resurfacing in February, her water bill was under $200. We had a freak storm this afternoon and 15 minutes later our pool is full of crepe myrtle and oak leaves and something that hits and rolls, leaving a brown stain on our pristine surface. We're going to vacuum to waste and get rid of some of the water, use the opportunity of less water to get down on the deep end (we're swimming wienies) and scrub off the stains, refill, resalt and hopefully put this behind us. How's that for a positive attitude?

    I'm such a newbie, I don't quite understand the difference between the pump box and the filter box. The pump runs the water through, circulating it, and it's the first box on the fence. I know the second one runs our Polaris. Is it also the filter, or just for the Polaris? Or does the filter automatically run whenever the pump is on? Do I need the pump/filter on while I vacuum to waste? I'M SO CONFUSED!

    Help me, Waterbear, you're my only hope...<nod to Princess Leia>...oh, and Pat of course...and Ben...etc.

    K

  2. #2
    Join Date
    Jun 2006
    Posts
    47

    Default Re: New SWG, High CYA???

    The pump probably has a filter basket in it to catch leaves before harming the pump. But the real filter is separate. If you follow your pipes, the flow of water goes from pump to filter to heater and then back to the pool.

    You can't vacuum unless the pump is running. The filter does not turn on and off. The pump does all the work pushing water thru the filter. When you vacuum to waste the filter gets bypassed. Leave the booster pump off while vacuuming.

  3. #3
    kathgilliam is offline ** No working email address ** kathgilliam 0
    Join Date
    Dec 1969
    Location
    Jersey Village, Texas
    Posts
    34

    Default Re: New SWG, High CYA???

    Thank you all so very much! We have vacuumed to waste successfully, and actually, except for the stains from the oak balls, the pool is looking beautiful as it drains away. : )

    Hula, I appreciate so much your plain spoken explanation of the pool plumbing. I am finally starting to "get" it.

    K

+ Reply to Thread

Similar Threads

  1. Advice Needed - High CYA, High Nitrates, and Lots of Algae
    By capshockeyfan in forum Pool Chemicals & Pool Water Problems
    Replies: 19
    Last Post: 07-03-2012, 05:47 PM
  2. High amounts of DPD Powder needed!! To high or no Clorine?
    By KaseyNewman in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 01-16-2012, 11:52 PM
  3. High Phosphates > 1,000 & High Nitrates 90ppm
    By applepar in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 21
    Last Post: 06-23-2011, 05:49 PM
  4. had algae, PH high, TA high, water now cloudy
    By Mom4fun in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 6
    Last Post: 06-12-2011, 01:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts