Sean,

I wasn't clear with the amount of chlorine levels in the generator. I was talking about the normal operation that generates the incremental chlorine for the pool and referring to what some people were claiming was a natural superchlorination in the cell during this process. I was also referring to the entire cross-section of area that the water flows through and not just an area near the plates (which has incredibly high concentration of chlorine).

I believe what you are talking about is a superchlorination mode which runs the cell at a much higher power level. If you ran at this level during the duration of one pool turnover, then the pool itself would get to that 10 ppm level. Is this what you are talking about? I apologize for my ignorance about the mode you have for your cells.

Richard