+ Reply to Thread
Results 1 to 10 of 11

Thread: Need input...PLEASE...

Hybrid View

  1. #1
    AndieP is offline Registered+ Thread Analyst AndieP 0
    Join Date
    Jul 2006
    Location
    Oklahoma
    Posts
    50

    Default Re: Need input...PLEASE...

    Also am I running a risk with damaging the foundation of the pool since apparently quite a bit of water is being lost underground? Should I just load the pool with bleach and only run the pump enough to circulate it?

  2. #2
    Join Date
    May 2006
    Location
    Morris, IL
    Posts
    354

    Default Re: Need input...PLEASE...

    Quote Originally Posted by AndieP
    Also am I running a risk with damaging the foundation of the pool since apparently quite a bit of water is being lost underground? Should I just load the pool with bleach and only run the pump enough to circulate it?
    I would not claim to be an expert, but I doubt it, if the leak is localized to one spot then it is probably just dispersing into the excavation around the pool and getting absorbed into the ground.

    I truly have never really looked at many IG plumbing setups, but is it possible to isolate some things? Can you direct all of your water to certain return jets, and maybe figure out which pipe has the leak? I have done this on large watermain systems (like entire subdivisions) in order to isolate the leak. Also, if you have a stethoscope you can "listen" to the decking and you may be able to hear the leak yourself with the pump on. That is what I would do, of course I would also fix it myself too but I am cheap.

  3. #3
    AndieP is offline Registered+ Thread Analyst AndieP 0
    Join Date
    Jul 2006
    Location
    Oklahoma
    Posts
    50

    Default Re: Need input...PLEASE...

    We only have 1 skimmer and 1 return jet. Apparently, there is a main drain but the previous owners kept telling us "there is no main drain." There is a drain but it looks like it has been plugged.

    There is about a 6 foot concrete deck all around the pool. I have no idea how the plumbing is done under there.

    I am taking care of the pool b/c my husband works long hours and really just doesn't have time to mess with it. I am also taking care of 4 kids (7, 4, and 2 year old twins) so I don't have alot of time to really try to find this leak.
    I wish I did and I wish I could do this myself but I am just overwhelmed by it all.

    But, I have noticed that there is a PVC pipe sticking out of the ground over by the filter....the backwash pipe leads into it. Anyway, you can look down in the pipe and it intersects with the main sewer line from the house. I can see water constantly dripping down there and at times water is flowing in that pipe. I have no idea if the pool plumbing connects to it underground but it seems like there should not be water dripping/flowing down there if water in the house isn't running. Any thoughts on this?

  4. #4
    Join Date
    Dec 2004
    Location
    Caledon, Ontario, Canada.
    Posts
    165

    Default Re: Need input...PLEASE...

    Is your fill water especially hard ???

    If the water is milky cloudy, then your high CL levels could be causing some percipitate to come out of the water, and the fact that you have to keep adding so much, keeps refreshing the supply. Endless circle.
    With CC=0 then is seems unlikley that you have an algae problem.

    Are you using a granular shock ? ... these have a bit of a reputation to cause milkiness.

  5. #5
    AndieP is offline Registered+ Thread Analyst AndieP 0
    Join Date
    Jul 2006
    Location
    Oklahoma
    Posts
    50

    Default Re: Need input...PLEASE...

    Sorry for the lack of knowledge on my part...but by "fill water being hard" are you referring to high calcium? If so, the answer is no...in fact I have been having a very hard time even keeping my calcium at 200. It is about 150 right now.

    I am using bleach only. The water isn't really milky cloudy...just kinda hazy looking. It's hard to describe the water color. Not blue, not green, not milky, The pool is painted white.

    It actually looks a bit clearer than it did earlier and the pump has been off for about 3 hrs and I haven't added anymore bleach so I'm sure the chlorine has dropped from 8 due to the sun.

    Should I bring the chlorine level up pretty high...maybe 15 or 20 tonight and run the pump just long enough to circulate? Or just add enough to keep it around 5?
    Last edited by AndieP; 07-21-2006 at 05:34 PM.

  6. #6
    CToon is offline Registered+ Thread Analyst CToon 0
    Join Date
    Dec 1969
    Location
    Elkins Park,Pa
    Posts
    57

    Default Re: Need input...PLEASE...

    Hi Andie ,

    Can you see anywhere where the ground looks saturated , or maybe the grass is growing like its getting watered ?

    Its not a solution to the problem , but maybe lend a little bit of peace of mind trying to figure it all out.

    AS it is now , I would keep the CL up by pouring it in around the perimeter and stir it up a little . Running the pump isnt helping ,but you knew that . I would shut it down myself.

  7. #7
    Join Date
    Jun 2006
    Location
    North Florida
    Posts
    205

    Default Re: Need input...PLEASE...

    I wouldn't lose any sleep over getting the water super clear - for the leak detection people, that is. Perhaps they just want clear water so their technicians don't have to get in a green slimy pool??? Doesn't sound like that's what will happen anyway. I don't think a little cloudiness should bother them.

    Good catch on your water loss. You're doing the right thing to call a leak detection company; they'll take care of it on Monday. In the meantime, follow CToon's advice and enjoy your kids.
    Sandy
    15,600 gallon, screened 15x30 IG plaster sport pool with 6x8 tanning area, Aquarite SWCG, Hayward cartridge filter, Polaris 280 cleaner

+ Reply to Thread

Similar Threads

  1. AG robotics, any input?
    By NWMNMom in forum Pool Cleaning: Manual or Automatic
    Replies: 5
    Last Post: 09-18-2007, 11:09 PM
  2. Need some input on chlorine level?
    By moreyes in forum Testing and Adjusting Pool Water Chemistry
    Replies: 9
    Last Post: 06-03-2007, 04:54 PM
  3. I need some input on my pool pump
    By dirtysouth in forum Above-Ground Pool Construction & Repair
    Replies: 5
    Last Post: 05-21-2007, 09:02 AM
  4. Electrical Quote Input
    By wbrady in forum In-Ground Pool Construction and Repair
    Replies: 8
    Last Post: 08-31-2006, 01:22 PM
  5. PS233 Results--Your input please!
    By SandyDittmer in forum DPD-FAS based testing
    Replies: 1
    Last Post: 06-12-2006, 10:46 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts