STILL Need HELP! We did get something to work to get the dye to the bottom, Thanks, Al. I have put dye at all of the skimmers and inlets, all around the seams where the wall meets the bottom, and the bottom drain. with nothing that I can tell is leaking. I have taken measurements and seem to be losing about 1 1/2 inches a day, seems to be the same with the motor on or off. This seems like a lot to me, and that it should be pretty obvious when the dye gets close, Am I right? The filter and motor are 2 feet higher than the deck of the pool and I am not loosing the pressure in the filter, if that makes any difference. I am going to turn the filter on with just the bottom drain now and see what happens. My next ????? is Where is the next most likely place to be leaking and what else can I do??? HELP!