Jandy Aquapure Recall

[StoshJ]

The last couple days I noticed my Jandy Aquapure 1400 showing a service code of 123 (Low voltage to cell). I called our pool builder (pool is 9 months old), and they promptly took care of it. Apparently it's a recall item from Jandy. They replaced a circuit board in the unit. Just an FYI if you're getting the same error.

[mgoecke]

I am having a similar problem with my one year old Aquapure. Which board did they replace? If you have any additional info it would be appreciated.

Thanks,
Mark

[ChiInSFO]

Sounds like a problem I'm having with my ClorMatic (somewhere in here says Jandy bought this company and rebadged to Aquapure?). I'm not sure it was the same error code -- I've unplugged the unit because it was making a lot of noise -- but a pool technician told me it was the circuit board.

I'm also interested in what circuit board was replaced, so I can see if I can get a new one without buying a whole new unit. My generator may be beyond warranty period, too.

[StoshJ]

Sorry for the late reply.. Unfortunately I wasn't home when they did the repair. I do know they opened up the control box though and the service rep said "we changed out a circuit board"...

[shebert73]

I'm having the same service code - 123. My pool is just under a year. I emailed my builder tonight so hopefully I should have some news soon.

[mgoecke]

Jandy sent me a troubleshooting flow chart, and I would be happy to forward a copy by E-mail to anyone who wants one.
Hypo

Send me an Email at mgoecke(nospam) @ cox.net

just remove the (nospam)