+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 17 of 17

Thread: CYA not showing yet.

  1. #11
    Join Date
    May 2006
    Location
    Tennessee
    Age
    57
    Posts
    234

    Default Re: CYA not showing yet.

    If you have any CYA that you put in you could take pool sample and desolve a small amount of CYA in it and test to see if it is any good.
    Steve

  2. #12
    Join Date
    Jun 2006
    Location
    Heartland
    Age
    53
    Posts
    82

    Default Re: CYA not showing yet.

    That sounds like a good idea. I'll tell you, I sure don't like burning off 1.42 gallons of bleach everyday.

  3. #13
    Join Date
    Jun 2006
    Location
    Central Texas
    Posts
    217

    Default Re: CYA not showing yet.

    I put 3 pounds of the Walmart (HTH brand) CYA in our pool which was supposed to add 25ppm per the BleachCalc. I'd already used two 3" pucks, which added about 5ppm CYA. So the -calculated- amount of CYA added was 30ppm. Walmart (HTH brand) 6-way test kit two weeks later said zero CYA. Pool store test said 40ppm CYA. I think the HTH test for CYA is not accurate. Either that, or their CYA is not the real deal.

  4. #14
    Join Date
    Jun 2006
    Location
    Heartland
    Age
    53
    Posts
    82

    Default Re: CYA not showing yet.

    I'm using the Taylor K-2006C kit I bought about a month ago. I feel like the test is accurate because I can see all the chlorine burning off comparing the two tests I do each day. I was hoping to start seeing less and less chlorine burning off, that would be an indication that my CYA levels are rising. No luck yet.

  5. #15
    Join Date
    Jun 2006
    Location
    Heartland
    Age
    53
    Posts
    82

    Default Re: CYA not showing yet.

    Well I got home today and my FC was 2.5 All the other days it's been 1-1.5
    CYA is still 0. Do you think the CYA is taking effect or is the FC difference just coincidence?

  6. #16
    Join Date
    Jun 2006
    Location
    Central Alabama
    Posts
    33

    Default Re: CYA not showing yet.

    No expert here but your test kit from Wal-mart (I have one too) has a quirk and the Taylor might be similar. Make sure when you are testing for cya that you allow the solution to sit for a while (I let it sit 10 minutes) before putting it in the black dot tube. I lost a lot of stabilizer reagent before I realized the recommended 2 minutes was not adequate. This may not be your problem but I had a similar experience as you before being a little more patient with the test. Hope this helps.

  7. #17
    Join Date
    Jun 2006
    Location
    Heartland
    Age
    53
    Posts
    82

    Default Re: CYA not showing yet.

    I'll give waiting longer for the solution to develop a try tonight. Taylor's instructions say to wait 30 seconds. I noticed my afternoon CL reading was higher yesterday, so something inside me says the CYA is there. We'll see. I'll post tonight what happens after I wait a longer amount of time. Thanks.

+ Reply to Thread

Similar Threads

  1. Pool pump showing a high psi
    By Wakkoguy in forum Pool Equipment & Operations
    Replies: 7
    Last Post: 07-17-2012, 11:54 PM
  2. No Chlorine showing up!!
    By Preston in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 4
    Last Post: 05-28-2012, 06:13 PM
  3. Chlorine Not Showing Up...
    By tommypenngotti in forum Using Chlorine and Chlorinating Chemicals
    Replies: 5
    Last Post: 04-01-2009, 04:20 PM
  4. Still showing no cya
    By tjcat in forum DPD-FAS based testing
    Replies: 2
    Last Post: 07-02-2006, 04:41 PM
  5. Help! 911 - algae showing up
    By sw_stupid in forum Testing and Adjusting Pool Water Chemistry
    Replies: 9
    Last Post: 06-23-2006, 07:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts