http://www.poolforum.com/pf2/showthread.php?t=365
it's a sticky in the Chlorine section .
I can't seem to find Ben's best guess chemical level chart for the correct levels based on CYA etc.
Any help would be great
http://www.poolforum.com/pf2/showthread.php?t=365
it's a sticky in the Chlorine section .
14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7
Thanks,
Yet I thought there was one that showed all the other Chemical levels as well. Like AKl, PH
Nope. Every pool is different so what works for one that's at one end of "normal" might not work at all for another pool that (for one reason or another) likes things at the other end of "normal". Several of us have made up our own "charts" for our own pools by reading through the PoolSolutions web site and using various info from this forum. But no one has made a chart for all pools.
Sherra
Kershaw County South Carolina
18x34 IG 2' radius rectangle vinyl liner (approx 27,500 gal) 1 1/2" pipes installed March 2006
(previous AG pool owner)
Thanks Sherra,
My water is clear so I will not over think it. Yet my Alk is very low so I will bring it up slowly w/ baking soda & test again as suggested here.
Thanks Again
Here are some general guidelines for the others.Originally Posted by cav
http://www.poolforum.com/pf2/showthread.php?t=1113
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Bookmarks