+ Reply to Thread
Results 1 to 10 of 12

Thread: Need help on first time results

Hybrid View

  1. #1
    duraleigh Guest

    Default Re: Need help on first time results

    Aggie,

    How does your water look? Any Clarity problems?

    Your CYA is very high but can be managed. Alk needs to come down some....80 - 120 is ideal. Calcium is quite high but probably livable if your water looks good. Whether or not you shock depends on the appearance of your water.

  2. #2
    Join Date
    Jul 2006
    Location
    McKinney, Texas
    Posts
    7

    Default Re: Need help on first time results

    Water looks great - probably the best ever. I dropped in 4.5 gals of ultra last night and the cl went from 7.5 to 18. According to the calculator on here, it should have taken it up to 25PPM, which was my target. Either Wal-Mart has some weak Ultra Bleach, or my pool is larger than I think. Any suggestions?

    Last night.
    FC = 18
    This morning
    FC 13.5

    Picture from this morning.

    Pool.jpg

  3. #3
    Join Date
    Jun 2006
    Location
    Lexington, SC
    Posts
    19

    Default Re: Need help on first time results

    Nice picture! Can I come over to your house to swim?

  4. #4
    duraleigh Guest

    Default Re: Need help on first time results

    I would discount weak bleach and probably the size of your pool....but you can doublecheck.

    What I would count on is that you never got to 25 because the organics in your water were consuming the Cl as you introduced it. So (probably) what should've been 25ppm and ends up 13.5ppm is from organics in your pool. You need to shock it again.

    In the evening, test and target more than 25ppm (Say about 30-35). That should ensure you reach breakpoint (shock)and get the CC's and organics out of your pool. The next morning....test again. If you've still lost a lot of Cl overnight, I would do it a third time. Only when you can hold Cl overnight with somewhere around a 10% loss or less would I consider backing then Cl down and keeping it around 8-15ppm

    PS - ditch the pucks...your high CYA and Ca (no Cal Hypo, either) indicate you should use only bleach the rest of the Summer.....or do a partial drain.
    Last edited by duraleigh; 07-16-2006 at 02:23 PM.

  5. #5
    Join Date
    Jul 2006
    Location
    McKinney, Texas
    Posts
    7

    Default Re: Need help on first time results

    I'll dump more cl in tonight and attempt to get to 35PPM. I'll trash the pucks, but we are in stage 3 drought water restrictions, so draining some of the pool will be last resort.

    Thanks and I'll post results tomorrow.

    BTW, Duraleigh, I lived in Hillsboro, NC in 2000/2001. Beautiful area

  6. #6
    Join Date
    Jul 2006
    Location
    McKinney, Texas
    Posts
    7

    Default Re: Need help on first time results

    I put in 6.5g of 6% CL last night and that brought me up to 26PPM. AM it was down to 17 so I but in 2.6g (didn't have time to wait and test). PM and I am down to 12.5 PPM and 0 CC. I am going out of town for 10 days on Wednesday. My neighbor can drop bleach in for me, but is there any harm to jack it up to ~50PPM so I won't be seesaw'ing around shock level?

  7. #7
    duraleigh Guest

    Default Re: Need help on first time results

    50ppm is your call....I think it will cause some testing issues and may have some negative effects I'm not aware of. The only reason I suggested 35 was because I was fairly confidant you wouldn't get there. Now, because, you've killed many of the organics, you may well be able to get to 50ppm and I would not recommend it. I'd shoot for 30-35 max and lower still as your water clears. Others may disagree.

+ Reply to Thread

Similar Threads

  1. First time using K-2006, need to interpret results
    By Wraypau in forum Testing and Adjusting Pool Water Chemistry
    Replies: 8
    Last Post: 05-22-2012, 09:58 PM
  2. First time test results...
    By freddyttt in forum Using Chlorine and Chlorinating Chemicals
    Replies: 30
    Last Post: 07-29-2008, 12:34 PM
  3. First time PS234 results...
    By alexnco in forum DPD-FAS based testing
    Replies: 9
    Last Post: 07-15-2006, 05:03 PM
  4. 1st Time Test Results
    By vanduse1 in forum DPD-FAS based testing
    Replies: 10
    Last Post: 06-16-2006, 12:51 AM
  5. 1st Time test results
    By Bnelson in forum DPD-FAS based testing
    Replies: 3
    Last Post: 05-29-2006, 03:16 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts