+ Reply to Thread
Results 1 to 10 of 11

Thread: Help here are my test results

Hybrid View

  1. #1
    sisie5 is offline Registered+ Thread Analyst sisie5 0
    Join Date
    Dec 2004
    Location
    franklin, in, us.
    Posts
    64

    Default Re: Help here are my test results

    are you talking about the free chlorine to keep it at 15

  2. #2
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,009

    Default Re: Help here are my test results

    Keep your chlorine level at 15 - you don't have to take it to 16 - the chlorine at shock level for the amount of cya in your pool will kill off what it needs to and that will get rid of the combined chlorine. Once you get rid of the combined chlorine and your chlorine stays at 15 overnight, then you can let the level drift down to normal.
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

  3. #3
    sisie5 is offline Registered+ Thread Analyst sisie5 0
    Join Date
    Dec 2004
    Location
    franklin, in, us.
    Posts
    64

    Default Re: Help here are my test results

    I not sure how to tell when you reach 15 for chlorine.my daily chlorine on goes to 5

  4. #4
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,009

    Default Re: Help here are my test results

    Here is a method that was used by one of the forum boards members:

    Here's the Jen-You-Whine CarlD Shot Glass Method!

    1) Get a shot glass (like you use to mix drinks).
    2) Get a gallon of steam distilled water--most mass-market drug chains stock it, and many supermarkets.
    3) Mix one shot glass full of pool water with one shot glass full of the distilled in a clean container (like a Pyrex measuring cup).
    4) Fill your test cell to the line with the mixture. Add your drops and take the reading.
    5) Whatever you read, double it. If it says "3ppm", you have 6ppm. If it reads "5ppm", you have 10ppm.
    6) If it's STILL seems like the chorine's too high to read, go to step seven....
    7) Mix 1 shot of pool water with TWO shots of distilled water, and re-run the test using that.
    8) Now TRIPLE your reading--if it reads "3", it's 9. If it reads "5", it's 15ppm.
    9) Going beyond two shots of distilled to 1 shot of pool water is possible (3 shots, quadruple your reading) but you lose accuracy fast. Still if it's the best way of reading chlorine, then you have to do it.

    CAVEAT: ONLY use this method to measure chlorine levels. Do not use it for the other tests you run, and do not use it with the FAS-DPD powder test--that goes to 50 to 100ppm of Free Chlorine anyway.
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

+ Reply to Thread

Similar Threads

  1. Test results vary between meter and drop test - not sure what to do?
    By west1745 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 14
    Last Post: 07-29-2006, 03:27 PM
  2. First 234s test results and warning about pool stores' results
    By SoCalBoo in forum DPD-FAS based testing
    Replies: 1
    Last Post: 06-16-2006, 01:48 PM
  3. First test results
    By poolbee in forum DPD-FAS based testing
    Replies: 5
    Last Post: 06-15-2006, 10:27 PM
  4. First Test Results
    By Cutter in forum DPD-FAS based testing
    Replies: 1
    Last Post: 06-14-2006, 07:30 PM
  5. first test results
    By jazzbone in forum DPD-FAS based testing
    Replies: 2
    Last Post: 05-26-2006, 03:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts