Is a 1.5hp pump to big for a 250lb filter???
Is a 1.5hp pump to big for a 250lb filter???
If you can get it in a 2 speed it will be fine.
The pump is 1 speed. pool store said 1hp to small for filter. Should I opt for just the filter tank, and continue to use my original pump? My pump is a 1hp pump. Would that be o.k. with a 250lb sandfilter?
I would probably just continue to use the 1 hp you already have. When I was looking for a 3/4 hp pump I was told the same thing by the pool store and they tried to sell me a 2 hp for my 200 lb sand filter. I ended up just ordering a 3/4 hp pump online and had no problems with doing that. Since I went from a 1.5 hp to a 3/4 I have noticed it filters better and my suction side barracuda ranger vacuum works much better too (it got stuck alot) it doesn't get stuck any more.
Hope this helps!!
Helps a bunch. I did not want to buy the pump, knowing the I have works fine, and sounds fine. I'm not familiar with pools, this is our first, but the pump and motor sounds pretty quiet and was working. So I will just go with that. THKS!!!!!!!!!!!!!!!
Bookmarks