Can a filter hose be fixed?

[hrsdennis]

It's been a very long, really hot day and I was just being silly. There really is no way to patch a pool hose, that I know of. Just replace it. That's two votes to replace.

Stay wet, Dennis

[Tredge]

I tried Duck tape when mine sprung a pinhole leak.....didnt work. No combination of glue and tape would hold it.

Try Gorilla Tape from the hardware store....I'd try it for kicks just to see if it would last.

[medvampire]

If it is the flex pvc why not cut the hose at the hole and put a straight coupling there.
Steve

[CarlD]

I tried duck tape but the hole quacked open further!

(another fowl attempt at humor).

[medvampire]

CarlD

I tried duck tape but the hole quacked open further!

(another fowl attempt at humor).

(groan) ...
As bad as my crappy humor but more class!
http://www.poolforum.com/pf2/showthr...5895#post25895
Except I cant send you to your room.
Steve

[matt4x4]

I fix any leak in plastic with one of two methods, both of which supply the same end result.
1. Torch and heated knife
2. Soldering iron.

Sometimes a little extra plastic is needed for your welding bead, try to find the same plastic for your welding. So far it has worked on every leak I have had to seal.
It works awesome on cracked solar panels and you do not lose that particular vein in your panel, so in turn, the panel does not lose efficiency.

[darenjones]

better off just hard plumbing it in with PVC, eliminate (well, almost) the possibility of a trimmer accident again...
parts are fairly cheap, and will last a lifetime (treated properly)

my 2 cents...
good luck with it