before i kill myself with stabilizer

[aylad]

Try shaking it for 30 seconds or so, then set it on the counter while you run your Cl and pH tests, and then pour it into the tube... see if that makes a difference.

Janet

[tenax]

thanks, A. i did it again after putting in 900 gm bottle of stabilizer about 2 hours ago now..it's getting a reading at about 15 ppm so it's getting there. i'll leave it overnight and run the pump for a full cycle and check it when i get home tomorrow. i have read the cautions about too much of it so i'll take it easy

[medvampire]

If you are useing solid CYA it can take week to desolve so you might wait a few days to test. If you are useing liquid you might want to check this post out.

http://www.poolforum.com/pf2/showthr...5498#post25498

Steve