Engineered Drawing

[markeast]

Does anyone know how I would go about getting an engineered drawing for a Kafko 20 x 34 Tahiti?

[markeast]

Is it possible that a 20 x 34 Kafko Tahiti (free form) is only 16 foot wide at it's widest point?

[Sherra]

Have you contacted Kafko? http://www.kafko.com/default.htm

[markeast]

I did call them. The guy I spoke with seemed a little guarded and referred me back to the dealer. He did say the pool is measured from the widest point of the deep end, "usually." I think I'm going to call again and ask for a copy of the dig spec's and/or installation manual, or really just anything that shows the actual dimensions of the pool. Thanks.

[markeast]

I have now been informed by Kafko that the 20 x 34 Tahiti pool is really only 16 ft. wide from coping to coping. It's 20 ft wide if you include some of the decking, etc.

[hancop]

That does not make sense to me as a 16*32 pool is 16 feet wide from coping to coping and 32 feet long from coping to coping. Something is not right here.