Feedback needed on first results

[bgray]

Received my PS234 today and tested:
FC 4.5
CC 1
TC 5.5
pH between 7.2 and 7.5, probably 7.4
Alk 130
Cal 300+ (I quit after 30 drops -- no change -- little pink globs swirling in the sample...???)
Cya 55

Pool specifics are in my sig.
TIA,
BGray

[CarlD]

Shock with bleach to 20 ppm, then see if you have any CC. If not, you are done.

Re-check your calcium. Recommended numbers for concrete/plaster pools is 200-400ppm and you only got to 300. As lono as it's in that range you are FINE, but higher is a problem.

Alk is technically a tad high but I wouldn't worry--it's only 130.