+ Reply to Thread
Results 1 to 10 of 27

Thread: Short Cycling

Hybrid View

  1. #1
    Join Date
    Apr 2006
    Posts
    15

    Default

    I have a 20,000 gallon in-ground vinyl pool. I do not have the specific readings but the pool store stated that everything is in line with proper water balancing. I will have to take another sample and post the readings you requested.

    In the mean time, what can I do now to start eliminating the algae without a properly operating filter?

  2. #2
    fog80 is offline Registered+ Thread Analyst fog80 0
    Join Date
    Dec 2004
    Location
    Columbia, Maryland, USA.
    Posts
    108

    Default

    are you using the bump handle after every few hours? My DE filter usually starts getting a high pressure reading every few hours when dealing with green algae. I then have to bump it and restart it for the pressure to temporarily go down.

    Once most of the algae is gone, I backwash and fill the filter with fresh DE.

  3. #3
    Join Date
    Apr 2006
    Posts
    15

    Default

    I have a Hayward DE 3620. I don't think it has a bump handle, it has a side monted multiport valve.

    Would vacuuming to waste be beneficial?

  4. #4
    duraleigh Guest

    Default

    Quote Originally Posted by donjoarm
    In the mean time, what can I do now to start eliminating the algae without a properly operating filter?
    "Don",

    First, I am not a DE filter guy...I have sand. My assumption is your filter is working fine.....it's simply getting plugged up with algae.

    Even if my assumption is incorrect, you have a green pool and Cl is the best cure.....lot's of it.

    Without you posting those numbers, this is a little bit of a guess, but a pretty safe one. Put in 4 gallons of 6% clorox bleach all at once in the late evening. That will bring your 20k pool to 12ppm of Clorox and start whacking that algae. Now you need to keep it at 12ppm 'til your water clears and the only way you can do that is to test your water.

    That'll give you a 24 hour head start but before we get too detailed on what to do next you'll need to help us by posting those tests.

    Meantime, your pump should be running continuously....that'll help you filter out the dead algae and start clearing your pool.

    Others will be along soon to advise you on your filter but it sounds like it's okay.

    vacuuming to waste will not be helpful.

    Dave S.

  5. #5
    Join Date
    Apr 2006
    Posts
    15

    Default

    OK, I've got some numbers. I added 4 gallons of bleach last night.

    FC .5
    TC .5
    ph 7.2
    CH 200
    Alk 70
    CYA 100

    I also have another problem-Air in the pump housing. I am trying to track down the source of that problem!

+ Reply to Thread

Similar Threads

  1. Pentair intelliflo cycling issues
    By Machster in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 11-10-2012, 04:14 PM
  2. Hot tub causes light short
    By jeffyzf in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 06-01-2012, 01:26 PM
  3. Cause for Polaris backup valve not cycling
    By texpilot in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 09-19-2011, 03:18 PM
  4. Spa pump problems - cycling off and on
    By Tomcat in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 02-11-2010, 01:03 PM
  5. Water temp short
    By tropic in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 08-24-2007, 02:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts