+ Reply to Thread
Results 1 to 6 of 6

Thread: OK water clearer now..explain this

  1. #1
    Madty is offline ** No working email address ** Thread Analyst Madty 0
    Join Date
    Apr 2006
    Posts
    66

    Default OK water clearer now..explain this

    Rec'd Ben's test kit today- the one for salt. Took only one week!
    Anyway I had a cloudy problem. I also have a small mustard algae problem. I have listened to everyone on the forum and it all helps. Went through a lot of bleach!!!! Well per my kit today my chlorine is at 22.5 and my CC is at 0. I know my cl will come down with the hot sun, but does the CC normally remain constant" ie, if I go down to 3 should my cc stay 0? What causes the change?(cc change) Also how long should it take to come down?
    30,000 gal SWG, vinyl pool... 82 degrees. Water is much clearer now, however the pesky mustard algae still comes back every couple of hours or so to the same locations. My pool gets full sun all day. I did add Yellow Treat 2 days ago. It has brought the amount down, but not to where it is 0. I am going to find Yellow Out and try. Cl did nothing- look at my number- it has been over 15 for days. CYA about 28.

    Thanks

  2. #2
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Age
    71
    Posts
    3,743

    Default Re: OK water clearer now..explain this

    What is your CYA level and what is your pH?
    Retired pool store and commercial pool maintenance guy.

  3. #3
    Madty is offline ** No working email address ** Thread Analyst Madty 0
    Join Date
    Apr 2006
    Posts
    66

    Default Re: OK water clearer now..explain this

    CYA level is 28 (it was at the end of my post-sorry) PH is 7.8- had to raise for the yellow treat.

  4. #4
    Join Date
    Dec 2004
    Location
    .
    Posts
    52

    Default Re: OK water clearer now..explain this

    Are you sure you have a mustard algae problem ? My mustard algae would come back the next day or two but never a couple hours later, that sounds like perhaps you have DE or dead algae in the pool. My mustard algae returned on the sides of the pool in certain spots and on a grotto shelf. I finally got rid of it by getting FC up to 25 ppm and using polyquat 60.

    What kind of filter do you have ?

  5. #5
    Madty is offline ** No working email address ** Thread Analyst Madty 0
    Join Date
    Apr 2006
    Posts
    66

    Default Re: OK water clearer now..explain this

    Quote Originally Posted by JohnInSoCal
    Are you sure you have a mustard algae problem ? My mustard algae would come back the next day or two but never a couple hours later, that sounds like perhaps you have DE or dead algae in the pool. My mustard algae returned on the sides of the pool in certain spots and on a grotto shelf. I finally got rid of it by getting FC up to 25 ppm and using polyquat 60.

    What kind of filter do you have ?
    Based on what it looked like, it was mustard algae. I have a sand filter- less than 1 year old. It looked like tan colored dirt. It would just poof away when you moved your hand near it. When I looked at it close, it was sorta slimy looking. Anyway based on web searches, it met the mustard criteria. I may try poly 60 in a few days just to see what happened. It's not dead, I believe, because I vacummed to waste and the next morning, it looked the same in teh same places- along the creases in the liner. My water has never gotten green either????

  6. #6
    Join Date
    Dec 2004
    Location
    .
    Posts
    52

    Default Re: OK water clearer now..explain this

    ok that sounds exactly like what I had and it sounds like mustard algae, just seems strange the stuff would return after only a few hours. My water was never green either but I never had a cloudy issue either, not sure what your issue is there.

    I just run the filter 24/7 for about 3-4 days, kept the chlorine at 25 ppm for 2 days, brushed every day, dumped in a bottle of poly 60% to start and then after a few days when the chlorine came back down I put in another quart of poly 60%. My pool is about 20K gallons. I also cleaned the filter (cartridge at the time). You may want to clean out your sand filter and replace the sand as part of this process. I don't have a liner so I don't know what level of FC is safe to prevent bleaching your liner, others will know that here.

    good luck
    Last edited by JohnInSoCal; 07-08-2006 at 01:58 AM.

+ Reply to Thread

Similar Threads

  1. Ok- kind of confusing to explain...
    By Madty in forum Using Chlorine and Chlorinating Chemicals
    Replies: 6
    Last Post: 07-14-2006, 03:35 PM
  2. Total alkalinity high and pH drifting up...can someone explain?
    By Henrys514 in forum Dealing with Alkalinity and Calcium
    Replies: 4
    Last Post: 06-13-2006, 08:46 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts