Results 1 to 10 of 19

Thread: power setting on AutoPilot

Threaded View

  1. #10
    Join Date
    Dec 1969
    Location
    Oakland, CA
    Posts
    48

    Default Re: power setting on AutoPilot

    It doesn't seem too difficult. Click on "Go Advanced" (next to "Quick Reply") at the bottom, then click on "Manage Attachments" at the bottom. There is a maximum file size but it's sufficiently generous for a small table. I attached a random picture from a visit to a power plant (the water chemistry lab, of all places...). A PDF document would be best. Putting it on the Autopilot web site would be even better.

    Thanks!
    Attached Images
    30'x16' (irregular) indoor gunite/plaster pool, 10k gal,
    Autopilot DLG-220 with SC-48 cell, 3/4 HP recirc pump,
    solar panels, heat exchanger from 200 kBTU/hour Viessmann boiler

Similar Threads

  1. Setting up our new 16x48
    By rlmommy in forum Intex-type Pool Setup & Operations
    Replies: 3
    Last Post: 05-29-2013, 11:24 PM
  2. Pool Pilot Setting
    By DONNIE in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 2
    Last Post: 03-07-2007, 04:45 PM
  3. Is my pool/ AutoPilot setting OK?
    By poolbee in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 14
    Last Post: 07-02-2006, 10:13 AM
  4. Where is the waste setting?
    By bass9864 in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 4
    Last Post: 05-02-2006, 09:47 AM
  5. Rinse setting?
    By thilbert in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 04-08-2006, 04:18 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts