+ Reply to Thread
Results 1 to 6 of 6

Thread: Just wait or add something?

  1. #1
    Join Date
    Jul 2006
    Location
    Hot, Dry Texas!
    Posts
    67

    Default Just wait or add something?

    My numbers are all "within range" but I have a cloudy pool, there is lots of minute particles floating around, I am reisiting the urge to add a floc or a clafiier for obvious reasons, but I am wondering if I need to just let the filter do its job and wait a few days for it to clear up or can I do something that will jump start it? I am willing to just wait a few days, or add something that won't mess up all my numbers. This is the first time in several weeks all my numbers have been within range, I have been vaccuming and backwashing, I added 7 bags of shock last weekend( before I found this site) and have lots of oxidation( I guess) floating around.
    I am perfectly ok with letting it go on its own, do you think I could get a skimmer sock and it would help? Or add some DE to the sand filter?? Just want my clear water back!!

  2. #2
    KurtV is offline Registered+ Widget Weaver KurtV 0
    Join Date
    Dec 2004
    Location
    Mandeville, LA, USA.
    Posts
    418

    Default Re: Just wait or add something?

    Mom, A skimmer sock and/or DE in your sand filter certainly won't hurt anything and may well help.

    I think you'll get more meanigful responses if you post your actual chemisty numbers instead of "in range".

    In the meantime, here's an article by Ben on reasons for cloudy water: http://www.poolsolutions.com/gd/cloudy.html.

  3. #3
    Join Date
    Dec 1969
    Location
    .
    Posts
    35

    Default Re: Just wait or add something?

    Be patient and let the pump run. I'd add DE/sock also and next time you add chlorine, just use bleach. Bags of shock you're using adds calcium and can increase cloudiness.

  4. #4
    Join Date
    Jul 2006
    Location
    Hot, Dry Texas!
    Posts
    67

    Default Re: Just wait or add something?

    OK, well here ya go then...

    TC=10
    FC-10
    CYA=85
    PH=7.4
    ALK=120

  5. #5
    Join Date
    Jul 2006
    Location
    Hot, Dry Texas!
    Posts
    67

    Default Re: Just wait or add something?

    Quote Originally Posted by day1
    Be patient and let the pump run. I'd add DE/sock also and next time you add chlorine, just use bleach. Bags of shock you're using adds calcium and can increase cloudiness.
    I am so DONE with the bags of shock, but I just need to get the "remnants" of the last bags I added over the weekend... I am running the pump 24/7 and I am going to get a sock and try it, it def won't hurt anything will it?

  6. #6
    KurtV is offline Registered+ Widget Weaver KurtV 0
    Join Date
    Dec 2004
    Location
    Mandeville, LA, USA.
    Posts
    418

    Default Re: Just wait or add something?

    The sock won't hurt anything. Nor will the DE unless there's a problem with your sand filter (e.g. channeling in the sand that will let the DE through; something that you probably can't rule out at this point).

+ Reply to Thread

Similar Threads

  1. Ph and alkalinity low, should I wait to adjust
    By Cincin5000 in forum Dealing with Alkalinity and Calcium
    Replies: 13
    Last Post: 05-28-2012, 12:08 PM
  2. how long to wait
    By cloudy in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 07-11-2010, 09:27 PM
  3. Animal Poo and How Long to Wait
    By SoCalBoo in forum Using Chlorine and Chlorinating Chemicals
    Replies: 11
    Last Post: 08-12-2006, 03:44 PM
  4. While my pool lies in WAIT ...
    By debs_pool in forum Using Chlorine and Chlorinating Chemicals
    Replies: 8
    Last Post: 07-22-2006, 01:18 PM
  5. how long to wait to shock
    By Sunny32504 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 05-23-2006, 09:49 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts