What are you chlorinating with now? I believe a TDS result normally includes salt......If so, yours is w-a-a-a-y too low. Let us know if you have enough salt in the pool.
......after I killed off a bunch of mustard algae. I have a 32,000 gallon in-ground vinyl pool. This is my fourth summer with the pool and until now I have never any problems despite my gross ignorance of pool maintenance. I have a SWG (Aqua Rite) that has been great. I went on vacation a few weeks ago and returned to a cloudy, yellow mess. A neighbor helped me diagnose mustard algae. I poured in the "shock" treatment....no help. I started doing some research and this site has helped tremendously. I have ordered Ben's test kit, but right now I am relying on pool store readings with a test strip. I eventually used "Algecide Plus" from Wally World (aka Walmart). This killed the algae, but the pool water is still cloudy, somewhat milky. Any ideas? My readings today are:
CYA 40
TC 3.4
FC 3.4
pH 7.6
TA 130
TDS (salt?) 1200
It has been two weeks since I killed the algae and the pool seems to be a little clearer. Do ineed to have some POP? Thanks.
BogeyGolfer
What are you chlorinating with now? I believe a TDS result normally includes salt......If so, yours is w-a-a-a-y too low. Let us know if you have enough salt in the pool.
You may be right about the salt. My LED starting showing "Low Salt." I added a bag today. I also backwashed the sand filter and the waste water looked like skim milk. How long does it take for Ben's kit to come in?I will retest the water later today.
The water seems to be clearing up. Except for adding salt, I haven't done anything to the water. What do you think is causing it to improve? Pool Owner Patience?![]()
Yesterday my copper reading came back high at 0.3. I used something called "COP OUT". The next day my water was dramatically clearer.
Was this a coincidence, or can high copper cause cloudiness?
Bookmarks