+ Reply to Thread
Results 1 to 7 of 7

Thread: Is my pump motor about to die?

Hybrid View

  1. #1
    tenax is offline Registered+ Widget Weaver tenax 0
    Join Date
    Jun 2006
    Posts
    445

    Default Re: Is my pump motor about to die?

    nope..my skimmer uses no add ons to filter beyond the filter itself..and the pump has been running strong for at least 10 years..

  2. #2
    Join Date
    Dec 2004
    Location
    Birmingham, AL, USA.
    Posts
    46

    Default Re: Is my pump motor about to die?

    I don't use a skimmer sock. But I did clean out the pump basket which had some trash in it and when I checked today it seemed a little cooler. However, still very hot though, you can touch it but you can't leave your hand on it very long without burning it.

    Has anyone found a definite answer to running 24/7 vs cycling. I would agree that many electric motors cycle on and off with no problems. But I'm curious if it is truly better to run constantly vs switching the pump off for a few hours. I figure over the course of a summer a few hours a day would add up and reduce the number of hours on the motor.

  3. #3
    Join Date
    Apr 2006
    Location
    Apache Junction, Az
    Age
    70
    Posts
    475

    Default Re: Is my pump motor about to die?

    Hi, I would shut it off for a few hours a day. Most filters around here run between 12 to 16 hours a day. The hotter it gets the longer they should run but you should not have to run it 24/7. If your suction is strong and your return flow good the system is probably OK. It's good to keep an eye on it though.

    Later, Dennis
    AG pool installer
    Arizona

+ Reply to Thread

Similar Threads

  1. Jauzzi pump : can't reconnect the motor to the pump, itis leaking badly.
    By andrec999 in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 06-17-2013, 04:08 PM
  2. Recommendations For Replacement Pump Or Pump Motor (1.5" Piping, High Head)
    By ChuckDavis in forum Pool Equipment & Operations
    Replies: 9
    Last Post: 05-25-2013, 03:56 PM
  3. Replace motor or pump and motor?
    By myLABSpool in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-25-2013, 01:13 PM
  4. One motor primes pump another motor wont????
    By jmurch in forum --cleanup--
    Replies: 1
    Last Post: 12-17-2012, 10:47 AM
  5. Replace motor or motor& pump?
    By jtcaputo in forum Pool Equipment & Operations
    Replies: 6
    Last Post: 09-08-2012, 07:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts