+ Reply to Thread
Results 1 to 5 of 5

Thread: Skimmer water level

Hybrid View

  1. #1
    geordie is offline ** No working email address ** geordie 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    43

    Default Re: Skimmer water level

    Mine goes over the top of the skimmer pretty frequently due to heavy rains. My pool is only 48" so I like to keep it topped off. The skimmer doesn't work correctly if it goes above the line but that isn't the end of the world if you just backwash it back down to level. More of a concern is that water overflowing the skimmer can erode around and under the bottom of your pool if you let it go on too long.

  2. #2
    tenax is offline Registered+ Widget Weaver tenax 0
    Join Date
    Jun 2006
    Posts
    445

    Default Re: Skimmer water level

    there is that geordie..quite honestly, if my water does go high and i'm not sure if i want to drain it some or let sit, i make sure ihave a good seal all around the pool where the liner meets the coping..

+ Reply to Thread

Similar Threads

  1. Water Level - HELP!
    By itsparadise in forum Above-Ground Pool Construction & Repair
    Replies: 5
    Last Post: 05-26-2012, 05:14 PM
  2. spa water level
    By johninmartinez in forum Pool Equipment & Operations
    Replies: 7
    Last Post: 01-10-2012, 11:26 PM
  3. water level
    By Barry J in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 1
    Last Post: 09-23-2011, 01:11 PM
  4. Intex AG pool skimmer water level?
    By aylad in forum Above-Ground Pool Construction & Repair
    Replies: 7
    Last Post: 03-03-2011, 09:58 AM
  5. how to use a water level?
    By amyinraleigh in forum Above-Ground Pool Construction & Repair
    Replies: 16
    Last Post: 07-17-2006, 08:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts