+ Reply to Thread
Results 1 to 5 of 5

Thread: Skimmer water level

  1. #1
    Join Date
    Dec 1969
    Location
    .
    Posts
    35

    Default Skimmer water level

    We have an 34 x 18 AG pool w/the normal 1 skimmer and return....question is,
    what will happen if water level gets at top of skimmer? I filled up alittle too high last nite (went out to eat w/hose in pool and forgot about it!) Anyway, it's raining hard now and pool is filling up even more. Guess I can just bw, but just did yesterday and added DE. I'm not complaining, my yard really needs the water down here in DFW area...but don't want to overfill pool.

  2. #2
    tenax is offline Registered+ Widget Weaver tenax 0
    Join Date
    Jun 2006
    Posts
    445

    Default Re: Skimmer water level

    i have forgotten (once) to turn off my tap when topping up the pool and went over the skimmer, over the coping and 2 things happened.

    a) the chlorine did a # on my grass

    b) the skimmer doesn't develop that whirlpool swirly effect (matter of fact, even if not overfilled persay but higher than a certain level, you lose that effect and skimmer basket can bob around in the hole.


    oh yeah..c) i suffered extreme embarrassment

  3. #3
    Join Date
    Dec 1969
    Location
    .
    Posts
    35

    Default Re: Skimmer water level

    thanks, so I guess just don't get skimmer completely full. It does the tornado effect when I took the basket out to clean off the skimmer sock, so I'm prolly ok. Maybe we'll get the foot of rain we need so bad...then I'll just have to backwash or waste removal of water. No worries about grass...it's dying from the heat.

  4. #4
    geordie is offline ** No working email address ** geordie 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    43

    Default Re: Skimmer water level

    Mine goes over the top of the skimmer pretty frequently due to heavy rains. My pool is only 48" so I like to keep it topped off. The skimmer doesn't work correctly if it goes above the line but that isn't the end of the world if you just backwash it back down to level. More of a concern is that water overflowing the skimmer can erode around and under the bottom of your pool if you let it go on too long.

  5. #5
    tenax is offline Registered+ Widget Weaver tenax 0
    Join Date
    Jun 2006
    Posts
    445

    Default Re: Skimmer water level

    there is that geordie..quite honestly, if my water does go high and i'm not sure if i want to drain it some or let sit, i make sure ihave a good seal all around the pool where the liner meets the coping..

+ Reply to Thread

Similar Threads

  1. Water Level - HELP!
    By itsparadise in forum Above-Ground Pool Construction & Repair
    Replies: 5
    Last Post: 05-26-2012, 04:14 PM
  2. spa water level
    By johninmartinez in forum Pool Equipment & Operations
    Replies: 7
    Last Post: 01-10-2012, 10:26 PM
  3. water level
    By Barry J in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 1
    Last Post: 09-23-2011, 12:11 PM
  4. Intex AG pool skimmer water level?
    By aylad in forum Above-Ground Pool Construction & Repair
    Replies: 7
    Last Post: 03-03-2011, 08:58 AM
  5. how to use a water level?
    By amyinraleigh in forum Above-Ground Pool Construction & Repair
    Replies: 16
    Last Post: 07-17-2006, 07:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts