Closed Thread
Results 1 to 9 of 9

Thread: Connecting Pool Fill Line to Sprinkler System

Hybrid View

  1. 07-08-2006 05:54 AM #1
    capecoraldipper
    capecoraldipper is offline --General User-- capecoraldipper 0
    Join Date
    Jun 2006
    Posts
    2

    Default Re: Connecting Pool Fill Line to Sprinkler System

    If you don't have a fill line plumbed in can you just "y" into one of the returns? I'm thinking just use a check vavle to hold back the pool water from the sprinkler line.
  2. 07-09-2006 03:19 PM #2
    rmeden
    rmeden is offline Registered+ Thread Analyst rmeden 0
    Join Date
    Dec 1969
    Location
    Cedar Hill, TX (Dallas)
    Posts
    66

    Default Re: Connecting Pool Fill Line to Sprinkler System

    I don't see any harm in that... as long as you have the check valve.
Closed Thread
« Liner/Pool dimensions | How deep would you build your sport IG? »

Similar Threads

  1. What do I use to fill in a 1 inch drilled hole below water line?
    By CountryBumkin in forum In-Ground Pool Construction and Repair
    Replies: 0
    Last Post: 05-21-2012, 07:43 AM
  2. Fill with only 1 foot of water and don't fill for 24-48 hours?
    By Jacob99 in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 04-26-2012, 06:00 PM
  3. Connecting Pentair MobileTouch2 to i5 system
    By KnightsArmy in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 06-26-2011, 08:07 PM
  4. Connecting PVC to pool pump
    By stepbill in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-07-2011, 07:04 AM
  5. Using Sprinkler Pump to fill pool?
    By Pontiadict in forum Above-Ground Pool Construction & Repair
    Replies: 7
    Last Post: 04-05-2006, 08:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules