Delta, welcome to the forum, great choice to have a hastle free pool!I don't know why you drained the pool, but you can start refilling it before you get the new MOTOR, odds are that the pump housing is ok, though you may need to replace the shaft seal and housing gasket when you install the new motor. As long as you can keep the pool water out of the pump while the replacement motor is being installed, everything should be fine. It sounds to me that the motor has been compromised (usually the bearings) which is why it's loud - the cutting off is caused by the motor overheating, it comes back on when it cools enough. My diagnosis is to replace the motor, however I haven't been out to see your situation, so there's a chance something else is going on.
I wish you luck with the problem, if I can be of further service, simply ask![]()
Bookmarks