+ Reply to Thread
Results 1 to 10 of 11

Thread: Add acid with new plaster

Hybrid View

  1. #1
    Join Date
    Apr 2006
    Location
    Scottsdale, Arizona
    Posts
    526

    Default Re: Add acid with new plaster

    Thanks...... so it sounds like a couple pints of acid to help hold the chlorine would not do much harm..


    How long until you started swimming?
    14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7

  2. #2
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: Add acid with new plaster

    I believe the rule of thumb is when all of the plaster dust is gone or 10-14 days. This gives the plaster enough time to fully firm up but I have heard of some going in earlier.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  3. #3
    Join Date
    Jun 2006
    Posts
    37

    Default Re: Add acid with new plaster

    Hi Phillbo;
    Here are the most specific start-up instructions I could find online (they gave me chemistry levels) which was what I was looking to aim for. This url is from the National Plasterer's Council website (no affiliation).

    http://www.npconline.net/start%20up.pdf

    I have been following the instructions in here for an exposed aggregate finish. I have 3M Colorquartz and it's looking good. If you'd like you can see it here (pardon the landscape that's next!):
    http://www.annonemoose.com/pool/DSC00705.JPG
    Jo
    24,000 Gal IG Pool ColorQuartz Premium
    1,000 Gal Spa - 8 Jets
    System 3 D.E. Filter,
    Max-E-Therm Heater
    550 Sq Ft Heliocol Solar System
    Intellitouch i7 & Goldline Aquarite SWCG
    SAm & SAl lighting, 2-2HP pumps
    Filled 6/21/2006 Owner/Builder

  4. #4
    Join Date
    Apr 2006
    Location
    Scottsdale, Arizona
    Posts
    526

    Default Re: Add acid with new plaster

    I hear ya about the landscaping.. tomorrow I start a week off to paint my fences and lay in sod etc.. wish I could swim
    Attached Images
    14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7

+ Reply to Thread

Similar Threads

  1. More acid questions for new plaster
    By Budman in forum In-Ground Pool Construction and Repair
    Replies: 5
    Last Post: 01-16-2012, 04:57 PM
  2. Rough Plaster - Acid wash or sand?
    By markphin in forum In-Ground Pool Construction and Repair
    Replies: 0
    Last Post: 05-23-2011, 07:46 AM
  3. Acid wash new 3m plaster?
    By No Need in forum In-Ground Pool Construction and Repair
    Replies: 0
    Last Post: 04-17-2007, 06:09 PM
  4. Why is sulfuric acid not so good for plaster pools?
    By smallpooldad in forum Pool Chemicals & Pool Water Problems
    Replies: 2
    Last Post: 05-12-2006, 07:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts