30K Gallon Inground Pacific vinyl liner pool
Cartridge filters
In floor cleaning system

Just got my kit and tested for the first time:
FC = 3
CC = 1
TC = 3
pH = 7.2
Alk = 200
Cal = 240
Cya = 60
Temp = 79

What do you think? The high alkalinity popped up right after spring opening when the pool company's counter tested my water and had us add 50 lbs. of baking soda all at once. The alkalinity has been hanging out up there ever since.

The water has been looking great since we got rid of massive algae upon spring opening by ultimately using around 15 gallons of chlorine (I believe I had contributed to the algae problem by a stupid error I made last fall right before closing when I mistakenly dumped directly into the pool a gallon of filter cleaner--yes, I did that...

The pool is now very clear and clean (we have 2 sets of cartridge filters that we hose off or clean and swap out every few weeks).

This is the northeast and we've gotten a mix of sun and clouds with rain every day for the past few weeks, torrential at times. This season I haven't had to add any water yet from a hose (municipal supply) due to all the rain...

We love our pool and spend as much time as possible in and by the pool with family and friends during pool season (while all-too-short in the NE, we do enjoy every glorious poolside moment we can get!).

I have come to believe that last year we were advised by our pool co. to use too many chemicals (clarifiers, enzymes, various shock treatments) and in the process, got into a vicious cycle of dependency on the pool co. and wasting $ while actually working against the attainment of excellent quality pool water.

My goal from here on out is to more finely tune our pool chemistry and, in the process, reduce excess chemical usage while maintaining comfortable, clear pool water (plus, being in the NE, it's important to keep the pool heater healthy, too!).

I'm diligent and persistent--bordering on OCD at times and open to considering what you suggest.

Gratefully,
dkarl