+ Reply to Thread
Results 1 to 8 of 8

Thread: Added DE to Sand Filter, 1 cup didn't raise PSi

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    Attleboro, MA.
    Posts
    160

    Default Re: Added DE to Sand Filter, 1 cup didn't raise PSi

    I have a 1.5hp one speed pump and from what I've been reading on this forum is way too much for my 7500 gallon pool. Also on the pump I can't see how many GPM's it's turning out. The filter says 35max GPM's. Not on the pump not in the manual either.

  2. #2
    Poconos is offline SuperMod Emeritus Whizbang Spinner Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars
    Join Date
    Dec 1969
    Location
    Honesdale PA
    Posts
    1,812

    Default Re: Added DE to Sand Filter, 1 cup didn't raise PSi

    1.5 HP pump on a 150# filter is way oversized. All bets are off in this situation with the DE. You could very well be blowing stuff right thru the filter. As I said before, look at the return jets and see if the stuff is blowing thru. Best I can suggest for now.
    Al

  3. #3
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Age
    71
    Posts
    3,743

    Default Re: Added DE to Sand Filter, 1 cup didn't raise PSi

    reality check on zeolite. the grains do have small pores in them that can theoretically filter down to a few microns but water is going to take the path of least reisitance which will be BETWEEN the grains of zeolite, not through them...just like with sand! You might get marginally better filtraton but, IMHO, this is just a new 'snake oil' being peddled to unsuspecting pool owners!
    Retired pool store and commercial pool maintenance guy.

  4. #4
    Join Date
    May 2006
    Location
    Tennessee
    Age
    57
    Posts
    234

    Default Re: Added DE to Sand Filter, 1 cup didn't raise PSi

    I have pondered zeolite just for ammonia removal but also thinking about salting my pool. From my understanding it uses salt for the ion exchange and you have to rebalance the equation every year by soaking the zeolite in a brine solution. If I were to use zeolite in a salted pool would it loose the ability to do the ion exchange killing the ammonia removal?
    I did add DE to my filter about ¾ cup and got a 4 to 5 lb increase in psi. It gave me very good results. I no longer see as many particles in front of my pool light and the water sparkles in the sun.
    Thanks
    Steve

+ Reply to Thread

Similar Threads

  1. Raise borates to 50 ppm but didn't see any corresponding increase in alk
    By Dead Beaver Ranch in forum Dealing with Algae & Slime
    Replies: 4
    Last Post: 03-31-2013, 12:13 AM
  2. Too much DE added to sand filter
    By seminolewind in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 11
    Last Post: 06-05-2007, 08:58 PM
  3. Red Streaks From Sand Added To Concrete?
    By webfeet in forum In-Ground Pool Construction and Repair
    Replies: 4
    Last Post: 10-12-2006, 08:27 PM
  4. Added DE to sand filter. Now pool is full of DE.
    By les_smith in forum Pool Equipment & Operations
    Replies: 13
    Last Post: 08-17-2006, 07:16 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts