Hasn't anybody experienced this?
Shelley
I've received Ben's kit and am having fun testing!
After a ton of rain I'm smelling CC so decided to test. In the FAS/DPD test I tested to clear at 10 drops of #2 but after a minute it got slightly pink again so I added another drop for a total of 11 for a TC of 5.5. I added the 5 drops of #3 and it went to clear. After a couple of minutes it was slightly pink again so I added another drop of #2 and that took care of it completely. 2 more minutes slightly pink again, added another drop of #2 and all gone. 5 more minutes...slightly pink again! How long do I keep this up?
FC - 5.5
CC- .5 or 1 or 1.5 or 2
TC - ?
CYA - 40
PH - 7-6 t0 7.7 (I regularly add Borax to raise)
TA - 100 (up from 40 per my last test where I added arm & hammer)
Shelley
Hasn't anybody experienced this?
Shelley
Why are you waiting a minute or two minutes? That's not part of the testing procedure for FC or CC.
Follow the instructions and don't improvise and your numbrs will be more accurate.
Carl
It wasn't that I was waiting a minute or two for any reason...I just did the test and then went to rince out the containers and it was pink again. I know the pool is under attack as it uncharacteristically stinks of chlorine to high heavens, but does not show any CC until after several minutes. I wasn't sure if those were true results or not. It seems as though my samples turn pink again after checking FC and also the CC test if I don't toss them right away. I was wondering if my supplies might have gotten cooked in the hot sun by FedEx and this was unusual.
I think this is pretty usual - I have seen a lot of posts with people saying the same thing. I wouldn't worry about it, if the test doesn't show pink right after you put in the 5 drops, then you don't have cc.
Northeast PA
16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5
Bookmarks