Taking the Plunge - Baquabeast conversion starting

[buckeyepoolman]

OK I have read through a lot of this forum and I am about to take the plunge.
I am using a knock off of Baquabeast called Revacil made by Mareva.

I am having the same problems with cloudiness and algae bloom. I have spent hundreds since July 1st and I'm tired of cloudy green water when the outside temps are in the mid 90's. I have downloaded the bleach Calculator but am a little confused by what it is asking me. I figured my pool size to be 51214.981L in volume , I'm assuming I need to find the concentration of the Bleach I am adding and the volume per container would be the Quanity of bleach? PPM increase would be 15?

I'm a newbie to pools in general and some of this is a little confusing. I think I may have not yet come upon the thread on the general step by step procedure for changing from a revacil Baquacil system to Chlorine.

Sorry for the generic questions,
Thanks,
Jamey

[TxDan]

You might want to Gallons to make it easier. Look under more calcs, then settings.

Dan