Helllpp Fassssssssttttttt!

[hrsdennis]

It all sounds good so far. Any chance of pics before the liner intall?

Will you be following Matt's instructions for the beaded liner install?

Remember that getting the bottom seams alligned correctly is the most important thing. The end to end (or maybe side to side) seams (or seam) and the seam that goes around the cove area. It must all fit the pool before you start the water.

You should clean the walls as best possible. It will all show through your new liner, you will be much happier by spending a little more time and doing that.

You should also consider installing the liner in direct sunlight. If you decide to try in the eve and it seems tight or like it does not want to fit, hold off for direct sun.

Looking good, Dennis