+ Reply to Thread
Results 1 to 10 of 94

Thread: Tonight I add salt to my non SWG above ground pool

Hybrid View

  1. #1
    Join Date
    Dec 2004
    Location
    Rocket City, AL, USA.
    Age
    50
    Posts
    117

    Default Re: Tonight I add salt to my non SWG above ground pool

    It took about 20 minutes to half an hour for my wife and I to dissolve two 40# bags. She had fun playing with the pellets, piling them up, moving them around with her feet, etc. The biggest thing was that we essentially were in the pool to help stir up the water. I'd recommend helping the salt dissolve.

    What I did was take a bag and open it in the middle of the pool, and spread it around a bit from the middle. We then shuffled it around with our feet until it was pretty much dissolved.

    1200ppm is about where we want to get to, so adding two bags will probably be perfect for your pool. If you aren't sure, then just get one bag and start with that. You can always add another later, but if you are happy with the results of just one bag, then there is no need. I did the same thing, I started with two bags, knowing that three or four would be what I ultimately will want to add. Two is nice, but I'll be adding one more sometime this week, and maybe one more after that.

    Just remember though that like CYA, the only way to get the salt back out of your pool is to drain and refill, so it's better to use less than you think you need than to overshoot your goal.

  2. #2
    NWMNMom is offline Registered+ Widget Weaver NWMNMom 0
    Join Date
    Nov 2004
    Location
    WAAAY NW Minnesota
    Posts
    461

    Default Re: Tonight I add salt to my non SWG above ground pool

    So, does adding this salt have any effect on PH, TA, TC/FC? Is the luxury of having softer skin/hair and nicer feeling water going to result in any additional chemicals having to be added or any more work maintaining? I'm reading these posts and really tempted to try it, but if its going to be more maintc work.......(not that its so much now with BBB and a bit of leaf skimmer/vac work) But I AM the only one here doing the work, so less is better!
    Beats driving to the lake!
    18'x33'x52" AG oval, hard plumbed system, 22" Pentair Meteor Filter 1.5hp pump, Goldline SWCG System, 2/4x20 SolarBear Panels, Biltmore Steps - 16x14' composite deck, Pool Rover Jr

  3. #3
    Join Date
    Dec 2004
    Location
    IL.
    Posts
    345

    Default Re: Tonight I add salt to my non SWG above ground pool

    Quote Originally Posted by NWMNMom
    So, does adding this salt have any effect on PH, TA, TC/FC?
    Nope

    Is the luxury of having softer skin/hair and nicer feeling water going to result in any additional chemicals having to be added or any more work maintaining?
    Nope

    I'm reading these posts and really tempted to try it, but if its going to be more maintc work.......(not that its so much now with BBB and a bit of leaf skimmer/vac work) But I AM the only one here doing the work, so less is better!
    Dumping in the salt is the most work involved. After that, it's business as usual

  4. #4
    Join Date
    May 2006
    Location
    Morris, IL
    Posts
    354

    Default Re: Tonight I add salt to my non SWG above ground pool

    Ok I am going to give it a go, why not. How long does the salt remain in the pool?

  5. #5
    Join Date
    Dec 2004
    Location
    Rocket City, AL, USA.
    Age
    50
    Posts
    117

    Default Re: Tonight I add salt to my non SWG above ground pool

    Until you drain your pool. Salt is like CYA in this respect. You can't decrease what you put in without draining the water and replacing it.

  6. #6
    Join Date
    Apr 2006
    Location
    Scottsdale, Arizona
    Posts
    526

    Default Re: Tonight I add salt to my non SWG above ground pool

    Don't forget to test your salt levels prior to adding or you may shoot over your target. My pool with a fresh fill already has about 600ppm of salt in it .
    14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7

  7. #7
    Join Date
    May 2006
    Location
    Morris, IL
    Posts
    354

    Default Re: Tonight I add salt to my non SWG above ground pool

    I got Solar Salt, Extra course salt granules, but it says that it is naturally evaporated by sun and rain now that I am reading it, I take it that it is not what I want? I will not add it until I get an answer. thanks

    It is 99.8% pure salt though.

+ Reply to Thread

Similar Threads

  1. Salt for Above Ground
    By pkhydro in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 6
    Last Post: 03-20-2013, 11:47 AM
  2. Help! Our new 30ft. above ground pool will be full tonight. What next?
    By Scarfie in forum Using Chlorine and Chlorinating Chemicals
    Replies: 6
    Last Post: 07-30-2011, 05:49 AM
  3. Salt system for in ground pool with liner.... Please help
    By pilot-werx in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 07-19-2011, 11:44 PM
  4. Salt water conversion(above ground pool)
    By lndknox in forum Above-Ground Pool Construction & Repair
    Replies: 4
    Last Post: 06-15-2011, 06:22 AM
  5. Tonight we hit 80 Degrees!
    By CarlD in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 11
    Last Post: 06-08-2008, 08:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts