Medvampire I would say you aren't being geeky enough. Shouldn't seawater be 3.5% not .35% by your own calculations?
Re: Tonight I add salt to my non SWG above ground pool
Medvampire I would say you aren't being geeky enough. Shouldn't seawater be 3.5% not .35% by your own calculations?
22,000 gal gunite pool, 1.5 hp pump, DE filter, and dreams of a SWG.
Re: Tonight I add salt to my non SWG above ground pool
Opps, Finger slipped, hate it when that happens.Shouldn't seawater be 3.5% not .35% by your own calculations
Me too!and dreams of a SWG
Steve
Last edited by medvampire; 06-27-2006 at 12:34 AM.
Re: Tonight I add salt to my non SWG above ground pool
If there's one thing I've learned from this site...it's that you measure and treat the problem you have. You don't just take stabs at what the problem may be...or toss a coin in a general direction in hopes that things will turn out grand.
Could this be another case where measurements would be the best bet...to see both where we're starting from...and our target range.
just wondering???
dan
Re: Tonight I add salt to my non SWG above ground pool
I am going to get my water tested and then add salt to around 1200 ppm and retest. I just haven’t found a good source of salt yet.
Steve
Posting Permissions
Reply With Quote
Bookmarks