+ Reply to Thread
Page 4 of 10 FirstFirst ... 2 3 4 5 6 ... LastLast
Results 31 to 40 of 94

Thread: Tonight I add salt to my non SWG above ground pool

  1. #31
    Join Date
    May 2006
    Location
    Morris, IL
    Posts
    354

    Default Re: Tonight I add salt to my non SWG above ground pool

    Ok I am going to give it a go, why not. How long does the salt remain in the pool?

  2. #32
    Join Date
    Dec 2004
    Location
    Rocket City, AL, USA.
    Age
    50
    Posts
    117

    Default Re: Tonight I add salt to my non SWG above ground pool

    Until you drain your pool. Salt is like CYA in this respect. You can't decrease what you put in without draining the water and replacing it.

  3. #33
    Join Date
    Apr 2006
    Location
    Scottsdale, Arizona
    Posts
    526

    Default Re: Tonight I add salt to my non SWG above ground pool

    Don't forget to test your salt levels prior to adding or you may shoot over your target. My pool with a fresh fill already has about 600ppm of salt in it .
    14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7

  4. #34
    Join Date
    May 2006
    Location
    Morris, IL
    Posts
    354

    Default Re: Tonight I add salt to my non SWG above ground pool

    I got Solar Salt, Extra course salt granules, but it says that it is naturally evaporated by sun and rain now that I am reading it, I take it that it is not what I want? I will not add it until I get an answer. thanks

    It is 99.8% pure salt though.

  5. #35
    Join Date
    Dec 2004
    Location
    Rocket City, AL, USA.
    Age
    50
    Posts
    117

    Default Re: Tonight I add salt to my non SWG above ground pool

    This stuff?? Seems okay to me.

    I bought a salinity test kit today, and I am less than 1000ppm at this point. We will be adding at least one more bag to the pool, probably tomorrow.

  6. #36
    Join Date
    Jun 2006
    Posts
    27

    Default Re: Tonight I add salt to my non SWG above ground pool

    Where did you get a salinity test kit? How do you know how many ppm you should have in your pool? Thanks

  7. #37
    PatL34 is offline Lifetime Member Widget Weaver PatL34 2 stars PatL34 2 stars
    Join Date
    Dec 1969
    Location
    Saint Cloud, FL
    Age
    88
    Posts
    331

    Default Re: Tonight I add salt to my non SWG above ground pool

    Taylor has a Salt test kit, (K1766), that you can order from your pool store.

    Pat
    20,000 Gallon IG Diamond Brite pool, 1.5 HP Sta-Rite pump, Hayward Microclear DE3600 filter, Favco solar panels, Poolpilot DIG-220 with SC-48 cell.

    + SWCG OPERATION thread here: http://www.poolforum.com/pf2/showthread.php?t=1226
    + SWCG Running Costs post here: http://www.poolforum.com/pf2/showthread.php?t=316
    + Effective Stabilizer addition post here: http://www.poolforum.com/pf2/showthread.php?p=6645

  8. #38
    Join Date
    Dec 2004
    Location
    Rocket City, AL, USA.
    Age
    50
    Posts
    117

    Default Re: Tonight I add salt to my non SWG above ground pool

    Sad to say that no one near me had a dropwise test kit for salinity, so I *GASP* bought some salt test strips.

    I figure that I don't need an exactly accurate reading on the salt, so test strips will do fine. It's not doing much more than giving me a ballpark figure anyway.

    ellenicol, the conventional wisdom seems to be to add about half the amount of salt required by a SWG for the best benefits. SWG's need around 3000ppm, so I'm shooting for 1200 - 1500ppm. Supposedly you can't taste the salt at these levels, but you still get all the benefits of silky smooth skin, manageable hair, and non-stinging eyes.

    Even at around 800ppm, these benefits are already beginning to be present.

  9. #39
    Join Date
    Dec 2004
    Location
    IL.
    Posts
    345

    Default Re: Tonight I add salt to my non SWG above ground pool

    Quote Originally Posted by sevver
    I got Solar Salt, Extra course salt granules, but it says that it is naturally evaporated by sun and rain now that I am reading it, I take it that it is not what I want? I will not add it until I get an answer. thanks

    It is 99.8% pure salt though.

    This is what I used. No problems

  10. #40
    haze_1956 is offline ** No working email address ** Thread Analyst haze_1956 0
    Join Date
    Dec 2004
    Location
    nj, usa.
    Posts
    114

    Default Re: Tonight I add salt to my non SWG above ground pool

    There is one potential problem I see for salt added to an above ground pool.

    And I believe someone else has mentioned it on at least one other thread.

    When salt water splashes over the wall, it flows down into the lower track. where it will evaporate and form salt crystals. I am not sure how corrosion resistant the track on an average AG pool is, and what effect there might be.

    This is the one factor that has been keeping me from adding salt to my AG.

    Thoughts ? Opinions?

    .

+ Reply to Thread

Similar Threads

  1. Salt for Above Ground
    By pkhydro in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 6
    Last Post: 03-20-2013, 11:47 AM
  2. Help! Our new 30ft. above ground pool will be full tonight. What next?
    By Scarfie in forum Using Chlorine and Chlorinating Chemicals
    Replies: 6
    Last Post: 07-30-2011, 05:49 AM
  3. Salt system for in ground pool with liner.... Please help
    By pilot-werx in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 07-19-2011, 11:44 PM
  4. Salt water conversion(above ground pool)
    By lndknox in forum Above-Ground Pool Construction & Repair
    Replies: 4
    Last Post: 06-15-2011, 06:22 AM
  5. Tonight we hit 80 Degrees!
    By CarlD in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 11
    Last Post: 06-08-2008, 08:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts