+ Reply to Thread
Results 1 to 3 of 3

Thread: Help - waste setting on filter drained pool

  1. #1
    Join Date
    Dec 1969
    Location
    Lutherville MD
    Posts
    37

    Default Help - waste setting on filter drained pool

    After 8 inches of rain yesterday in only a few hours my pool was about to overflow. I turned the filter to "waste" but since it was late, left the pump off. This morning the pool level had lowered about 8 inches. Is this normal without the pump running? I've turned the filter back to "filter" but left the pump off till we get (another) huge influx of rain later today. Am I worrying over nothing?

  2. #2
    Poconos is offline SuperMod Emeritus Whizbang Spinner Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars
    Join Date
    Dec 1969
    Location
    Honesdale PA
    Posts
    1,812

    Default Re: Help - waste setting on filter drained pool

    You probably had a siphon going. Quite common if the waste discharge from the waste port is lower than the water level. Most likely to occur with AG pools. Don't worry, just switch the valve to FILTER when you're done dumping water.
    Al

  3. #3
    Join Date
    Dec 1969
    Location
    Lutherville MD
    Posts
    37

    Default Re: Help - waste setting on filter drained pool

    Thanks! Actually it's an inground pool, but yes the output is lower than the pool level. I'm just waiting for more torrential rain now...

+ Reply to Thread

Similar Threads

  1. Waste setting not working
    By smoovie in forum Pool Equipment & Operations
    Replies: 6
    Last Post: 05-25-2013, 10:23 PM
  2. Multi-Port Does NOT have a "Waste" setting
    By trickedout in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 08-09-2012, 03:55 PM
  3. Backwash, rinse, filter blows junk back in pool, possible waste line issue
    By Cankoo's pool in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 04-27-2012, 02:37 PM
  4. Old DE filter- how to vacuume to waste?
    By Amir in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 06-28-2006, 12:47 PM
  5. Where is the waste setting?
    By bass9864 in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 4
    Last Post: 05-02-2006, 09:47 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts