The reason I asked is that the amount of cya will determine how high your shock levels need to be, and how high you can go before bleaching the liner.


Stabilizer . . . . . . Min. FC . . . . Max FC . . . 'Shock' FC
=> 0 ppm . . . . . . . 1 ppm . . . . . 3 ppm . . . . 10 ppm
=> 10 - 20 ppm . . . . 2 ppm . . . . . 5 ppm . . . . 12 ppm
=> 30 - 50 ppm . . . . 3 ppm . . . . . 6 ppm . . . . 15 ppm
=> 60 - 90 ppm . . . . 5 ppm . . . . . 10 ppm . . .. 20 ppm
=> 100 - 200 ppm . . . 8 ppm . . . . . 15 ppm . . .. 25 ppm

I'm sure you can go a little higher than what is on the chart, but I wouldn't push it. If you maintain the ppm you need to shock, then your algae will clear, as long as you stay consistant with keep the water at shock levels.