+ Reply to Thread
Results 1 to 10 of 19

Thread: Diatomaceous Earth versus Sand filter

Hybrid View

  1. #1
    Join Date
    Jul 2006
    Location
    OKLAHOMA
    Posts
    44

    Default Re: Diatomaceous Earth versus Sand filter

    Quote Originally Posted by CarlD
    Well, the DE fix is super-cheap so you might as well try it--throw out eight or 10 bucks on 10# of DE. Add enough to raise pressure 1 #, starting with about 1/3 of a cup. 10# will easily last one summer, if not 2.
    CarlD,

    HOW do you do this? (I'm not ready yet (or even no if I should do this) - still working on that algae problem!) Is this something I might want to do? Or do I just want to keep sand? If I have to have "maintenance" it's usually expensive -- because I have to call the pool place. WHERE do you add this DE? And it's okay to mix sand & DE? If this is addressed somewhere else, I apologize for not continuing my search of threads.
    And I can't thank you enough for all your help -- but thanks for all your help.
    Blessings,
    Debbie in OK

    FOXX IG Vinyl Pool 18 X 36 (installed 2001)
    Pool Volume: 20,655 gallons -- Laars Lite 2 gas heater
    Hayward Pro Series Sand Filter (S-244T) -- Hayward 1.5 HP Pump

    God gave you 86,400 seconds today -- have you used ONE to say THANK YOU?

  2. #2
    MaryLee is offline Registered+ Thread Analyst MaryLee 0
    Join Date
    Apr 2006
    Location
    Southern New Hampshire
    Posts
    90

    Default Re: Diatomaceous Earth versus Sand filter

    Quote Originally Posted by debs_pool
    WHERE do you add this DE? And it's okay to mix sand & DE?
    I'm not CarlD and I may be wrong, but I think you just add a scoop of DE to the skimmer. This will suck it into the filter where it will stay and help with filtration...the same as a DE filter. Hopefully someone else will chime in here.
    18 X 40 IG Vinyl
    3 1/2' ft to 8' deep
    Pentair DE Filter
    400K BTU Pentair Minimax heater

  3. #3
    Join Date
    May 2006
    Posts
    14

    Default Re: Diatomaceous Earth versus Sand filter

    I just moved and now own a pool with a DE filter. Lately I have had a pressure problem. Could low DE cause low pressure? (I don't even know if this makes sense).

    How often should the DE be changed/cleaned?

  4. #4
    matt4x4 is offline Lifetime Member Verb Herder matt4x4 2 stars matt4x4 2 stars
    Join Date
    Dec 1969
    Location
    .
    Posts
    819

    Default Re: Diatomaceous Earth versus Sand filter

    Debs - I'm not carl either, but just to let you know, those of us who do use DE as a supplement in the sand filter do so by adding 1-2 cups of it through the skimmer - your pressure should change by about 1.5-2 lbs - this shows you have loaded it with enough DE.
    I would do this when you are ready to start cleaning up all the dead algae - you will get your pool clean much quicker.
    Pre DE, It took me about 3-4 good vacs to recover from a bloom, now, 2 will do it, and the second is more a final spot clean than anything else. However, my backwashing increments increased proportionally!
    You will find that you will only be able to vac about 1/3 to half your pool before you have to backwash - this is a good thing, it shows and proves that adding DE works well.

  5. #5
    Join Date
    Dec 1969
    Location
    .
    Posts
    37

    Default Re: Diatomaceous Earth versus Sand filter

    Putting a little DE in the sand filter can help clear the pool when cleaning up the algae. Dead algae is very fine and it sometimes takes a long time for a sand filter to clean it up. A little DE in the filter should help catch the dead algae. Simply put a cup or two in the skimmer. Watch the pressure. It may rise rather quickly as it catches the small dead particles. When you backwash, the DE wiill be backwashed out of the filter. If you want, you then add a little more.

  6. #6
    papa6 is offline ** No working email address ** papa6 0
    Join Date
    May 2006
    Location
    Des Moines Iowa
    Age
    74
    Posts
    7

    Question Re: Diatomaceous Earth versus Sand filter

    I live in Des Moines, Iowa and have no complaints with my sand filter. My brother-in-law on the other hand lives in Las Vegas and asked me which would be best for him (DE or sand). How big of a role does climate play into this decision. Sand works great for me in the midwest, but what seems to work better in the desert?....or does it matter? Any input on this would be greatly appreciated.

    Thanks

+ Reply to Thread

Similar Threads

  1. How often shoud I replace sand in sand filter?
    By mikef in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 07-18-2011, 10:41 PM
  2. Can you spray Diatomaceous Earth to the filter membranes?
    By 105ex in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 08-03-2009, 03:01 AM
  3. what volume is 1 lb of diatomaceous earth ?
    By maxhiller in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 08-01-2007, 02:09 PM
  4. Sand Filter Pressure Problems; Sand Bad in 3 MONTHS of USE?
    By MikeInMo in forum Pool Equipment & Operations
    Replies: 10
    Last Post: 05-30-2007, 11:01 PM
  5. Q's on Diamethicus(?) Earth Filter
    By rio002 in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 04-06-2006, 10:13 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts