+ Reply to Thread
Results 1 to 4 of 4

Thread: PS234 Test

Hybrid View

  1. #1
    duraleigh Guest

    Default Re: PS234 Test

    Bruce,

    If your CC result is correct, I suggest you shock your pool. Bring you Cl up to 10-12ppm and hold it there 'til you get that CC result to 0. Then maintain your Cl somewhere between 3-8ppm, depending on your CYA level.

  2. #2
    Join Date
    Jun 2006
    Location
    Pennsylvania
    Posts
    2

    Default Re: PS234 Test

    Well, It's been a month since my first test. These are my numbers after adding chemicals and retesting many times. FC 2, CC .5, TC 2.5, PH 7.2, AIK 80, CAL 70, CYA 40, Temo 83. Are these OK or how can I tweek them? Thanks

+ Reply to Thread

Similar Threads

  1. 1st Test with PS234 W/ copper test
    By JJSZABO in forum DPD-FAS based testing
    Replies: 4
    Last Post: 07-07-2006, 03:15 PM
  2. first PS234 test
    By newtopools in forum Using Chlorine and Chlorinating Chemicals
    Replies: 9
    Last Post: 06-24-2006, 07:04 AM
  3. Necessity for ordering Salt Test in PS234 test kit
    By Scarlett in forum DPD-FAS based testing
    Replies: 4
    Last Post: 06-13-2006, 12:04 AM
  4. First test results with the PS234
    By metalman in forum DPD-FAS based testing
    Replies: 6
    Last Post: 05-26-2006, 10:20 PM
  5. First test with PS234
    By tbatti in forum DPD-FAS based testing
    Replies: 2
    Last Post: 05-13-2006, 11:04 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts