+ Reply to Thread
Results 1 to 7 of 7

Thread: On-line testing instructions?

  1. #1
    Join Date
    Dec 2004
    Location
    .
    Posts
    6

    Default On-line testing instructions?

    I just bought refills for my testing kit, but all my directions were stuck together and are now a tangled mess of paper.
    Is there anywhere on-line that gives the directions for the tests??

    How many drops per etc...

    Thank!
    Carol

  2. #2
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Age
    71
    Posts
    3,743

    Default Re: On-line testing instructions?

    What kit do you have?
    Retired pool store and commercial pool maintenance guy.

  3. #3
    Join Date
    May 2006
    Location
    Morris, IL
    Posts
    354

    Default Re: On-line testing instructions?

    I took my instructions when I first got them and taped them front and back with packing tape. One year and then some later and still good to go. I don't know where you can get the instructions, but I would imagine that they can be had from the manufacturers website. At the very least you should be able to get a support person to email them to you. Possibly mail another hard copy if you word it right.

  4. #4
    Join Date
    Dec 2004
    Location
    .
    Posts
    6

    Default Re: On-line testing instructions?

    I have the HTH 5 way Test Kit.
    Most I remember or are easy to figure out but te CA test is muddled. I can't read the fill mark for the larger tube and if you are to add the drops up to the 14 ml mark?
    I do remember it took a lot of drops.... thanks for any help. I SHOULD have waterproofed mine!!
    Been searching the net, but so far not much luck.

  5. #5
    Join Date
    Dec 2004
    Location
    .
    Posts
    6

    Default Re: On-line testing instructions?

    http://www.hthpools.com/Fed/Corporat.../treatment.htm

    This is the main site for HTH, but could not find instructions posted.

    Wrote them an e-mail and if I get them via e-mail, will post them here for others.

    Carol

  6. #6
    Join Date
    May 2006
    Location
    Morris, IL
    Posts
    354

    Default Re: On-line testing instructions?

    I believe it should have came with a vial with a flip up spout. This is what you fill with water to the 7mL mark, then add the solution to the 14mL mark. You then squirt the solution into the vial with the black dot in the bottom and wait for the dot to disapear. The corresponding number on the vial with the black dot on it is the number you want.

  7. #7
    Join Date
    Dec 2004
    Location
    .
    Posts
    6

    Default Re: On-line testing instructions?

    THANK YOU!!!
    Not only could I not read the amounts... couldn't read the bottle number either and was looking at the wrong one!

    Now... can you help me find the air leak in my filter??? :-)

    Carol- who is happy to be talking pools again!! And so grateful for this forum. Starting out right this year.

+ Reply to Thread

Similar Threads

  1. Full opening instructions?
    By cmcq in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 10
    Last Post: 03-29-2009, 05:44 PM
  2. Aqua Chem 6-way Instructions
    By cdognight in forum Testing and Adjusting Pool Water Chemistry
    Replies: 5
    Last Post: 05-14-2007, 01:30 PM
  3. Help with test kit instructions
    By kevincad in forum Testing and Adjusting Pool Water Chemistry
    Replies: 6
    Last Post: 04-12-2007, 10:33 PM
  4. Instructions for PS234 test kit
    By Poolidiot in forum DPD-FAS based testing
    Replies: 9
    Last Post: 02-25-2007, 01:11 PM
  5. Where are the instructions for PS234
    By ksturge in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 07-05-2006, 09:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts