When I attached my 10x4 panel to our little 15'x3' EasySet, I had NO problems driving it with the little 1/6hp cart filter/pump it came with. The panel actually DROPPED resistance so low that I couldn't get good velocity at the return and I would have to valve it down a little, which worked fine. I just set the panel on the ground next to the pool. Because of the heat, you don't tend to get all the disgusting bugs and stuff under it--it bakes the ground more, driving them away.
I DID re-plumb the panel so that the inflow and outflow were on the same end--it's not hard--and the far end was sealed. This way the water flows one direction for one 10x2' half, and the other on the other 10'x2' half. Kinda like having 2 10x2's and going down to the far end of one and coming back to the near end of the other. It's hard to say in words what's really simple.
It worked too well--one day, in North Central NJ, our water hit 106 or 107! Talk about a LARGE hot tub!
Bookmarks