+ Reply to Thread
Results 1 to 10 of 12

Thread: Replace Jandy Ray-Vac?

Hybrid View

  1. #1
    Join Date
    Jun 2006
    Posts
    14

    Default Replace Jandy Ray-Vac?

    My Jandy Ray-vac has serviced my pool pretty well. It began to fall apart (my chems off balance?) bit by bit last season, and now it isn't that effective in making turns, or sucking for that matter. I'd like to replace it, but want to know what the easiest way is. I'm confused with reading some of the recommendations, because they never mention how the equipment gets attached: extra pump vs. no pump needed. I'm guessing my Jandy has no extra pump. It gets a feed from the filter, and the water propels it and causes a suction?

    What product can I buy, and just unhook the Jandy, and hook in the new product? How do I classify this type of cleaner?

    Thanks for any help.

    Chi

  2. #2
    Elias is offline ** No working email address ** Elias 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    6

    Default Re: Replace Jandy Ray-Vac?

    I am in the same boat your are. I would appreciate any input anyone has to offer. I am tired to replacing parts in the Rayvac after a couple of years and it is never quite right for whatever reason.

    I am considering the MARS HP™ from Zodiac. Does anyone have any info on this unit? It is also pressure side, but I am not sure if it requires a booster.

    Eli

  3. #3
    Elias is offline ** No working email address ** Elias 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    6

    Default Re: Replace Jandy Ray-Vac?

    BTW, I am on my second Rayvac. Nice unit when it works, it just seems to wear quickly.

  4. #4
    Join Date
    May 2006
    Location
    Downingtown, PA
    Posts
    192

    Default Re: Replace Jandy Ray-Vac?

    Any pressure side, non-booster pump cleaner should be a fit for Ray-Vac.
    Outside of Philadelphia, PA
    18' x 40' IG - 22K gallons
    Sylvan Gunite Pool (1979)
    Plaster re-done (1997)
    48 Sq Ft Hayward D.E. Filter (2003)
    1.5 hp Hayward Super Pump (2006)

  5. #5
    Join Date
    Dec 2004
    Location
    Westminster, MD.
    Posts
    20

    Default Re: Replace Jandy Ray-Vac?

    I just replaced my RayVac with a Polaris 360. Just had to replace the hose fitting in the return. I got my Polaris on eBay for a great price.

  6. #6
    Elias is offline ** No working email address ** Elias 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    6

    Default Re: Replace Jandy Ray-Vac?

    I tried the Polaris and I liked the RayVac better. Maybe I didn't have the 360 though? I don't remember which model I had.

+ Reply to Thread

Similar Threads

  1. Jandy vs. Pentair
    By ajstri in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 04-25-2012, 11:49 AM
  2. Help with Jandy RS8 PCB Problem?
    By jdidonato in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 01-06-2008, 09:39 PM
  3. When to replace FAS-DPD #1
    By tbatti in forum DPD-FAS based testing
    Replies: 2
    Last Post: 09-04-2006, 11:50 AM
  4. Jandy AquaPalm
    By dap8283 in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 07-02-2006, 02:15 PM
  5. Jandy SWG problem?
    By jayamberly in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 06-16-2006, 12:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts