+ Reply to Thread
Results 1 to 4 of 4

Thread: new kit - first test

Hybrid View

  1. #1
    west1745 is offline Registered+ Thread Analyst west1745 0
    Join Date
    Dec 2005
    Location
    .
    Posts
    55

    Default Re: new kit - first test

    Thanks, Dave.

    If I do drain out 50%, will I have to filter the incoming water at all? I know the pool company put this big canister on the hose line so it would filter out stuff when they first filled it.

    Is there a problem to swimmers with keeping the chlorine that high? And are you talking the TC or the FC?

    We had a pool boy take care of our pool while we were away and I think he got carried away with the stabilizer. The chlorine was very low even with the SWG set at 60%. I think the calcium is high because the pool is new - I was adding a LOT of acid in the beginning.

  2. #2
    duraleigh Guest

    Default Re: new kit - first test

    West,

    Call the pool company and find out what they were filtering out. Good fill water should be fine....must be an issue with water in your area or perhaps they were just being extra thorough.

    Swimming above 10ppm may fade a swimming suit...won't fade the swimmers...skinny-dip, anyone?

    Above 5ppm, you will test for FC only (normally), so we're talking FC although the difference between FC and TC is minimal at those levels.

+ Reply to Thread

Similar Threads

  1. pool test strips vs dropper test kit
    By sputterbug10 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 08-22-2012, 10:23 PM
  2. CYA level-my test and pool store test
    By hancop in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 09-20-2006, 06:13 PM
  3. Test results vary between meter and drop test - not sure what to do?
    By west1745 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 14
    Last Post: 07-29-2006, 03:27 PM
  4. Necessity for ordering Salt Test in PS234 test kit
    By Scarlett in forum DPD-FAS based testing
    Replies: 4
    Last Post: 06-13-2006, 12:04 AM
  5. PS233 test kit and CYA test question
    By mshumack in forum DPD-FAS based testing
    Replies: 8
    Last Post: 06-06-2006, 10:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts