I have doubts if you will be able to patch it. If not, either get a new liner, or cut the drain out and patch the resulting hole.
I have doubts if you will be able to patch it. If not, either get a new liner, or cut the drain out and patch the resulting hole.
I have an update. After some research the liner is not vinyl. It is pvc coated polyester canvas that is nylon reinforced. How about the silicone now? Options?
I had a (white water) raft made out of same material. You can get a repair kit from Sports Store for raft repair - or search on the internet.
Good Luck
Silicone seal can be a good temporary seal even underwater if you squish enough of the stuff into the leaking area. Did a temporary patch a few years ago when I punched a hole in my skimmer housing....stupid bubu. In an application like yours I wouldn't rely on silicone seal.
Al
Again thank you for the replies. Looking into this material I think I may have found a sealer. 3M makes a marine adhesive sealant 4200/5200 fast cure that seems to be right up my alley. I will be visting a marine store this weekend and will let you guys know how I made out. Again thank you for the replies and any other ideas are greatly appreciated.
Well, just an update the 3M Marine sealant 5200 did the trick.
Bookmarks