+ Reply to Thread
Results 1 to 10 of 15

Thread: a question for the "puck gurus"

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    .
    Posts
    63

    Default Re: a question for the "puck gurus"

    Do not leave pucks in your skimmer with pump shut off. The pucks will still dissolve in the water and highly chlorinated water will be in the skimmer now. If some of that water leeches out around the mouth of the skimmer you risk bleaching your liner around the skimmer.

    If you have an old, faded liner or don't care if it gets damaged you can leave them in. Personally, I would not do that.

  2. #2
    duraleigh Guest

    Default Re: a question for the "puck gurus"

    Sevver,

    You're CYA level will remain pretty constant....probably 'til next Spring.

    Flicker,

    back to my original question. When you remove them, how do you store them 'til the pump is restarted?

  3. #3
    Join Date
    Dec 1969
    Location
    .
    Posts
    63

    Default Re: a question for the "puck gurus"

    Dave,

    Sorry, I didn't answer your question. I always ran my pump full time when using pucks. I would place the skimmer basket (with pucks) on my plastic top rail if I added bleach (to shock) in the skimmer, and then replaced the basket.

    I would assume some dissolving would still occur since the puck is wet. Maybe try putting one in a sealed sandwich bag. If it dissolves you will see it. Secondly, if chlorine gas builds up in the bag it will expand. Just an idea. That is if you are talking about one puck at a time.

    When I first joined the forum (about 5 yrs. ago) I asked Ben how much CYA a puck would add to a 16,000 gallone pool and he said "about 1 ppm."



    Harry

  4. #4
    waste is offline PF Support Team Whizbang Spinner waste 3 stars waste 3 stars waste 3 stars
    Join Date
    Dec 1969
    Location
    S.E Maine
    Age
    58
    Posts
    1,765

    Talking Re: a question for the "puck gurus"

    Dave, thanks for posting your #s . I've always told my customers to just pull them out and put them on a plastic lid from one of their old buckets - it saves the deck from bleaching and keeps the tabs close to the skimmer for reinstallation the next day.
    (Don't want to start a huge debate but; why do you want to raise the cya?)
    Luv & Luk, Ted

    Having done construction and service for 4 pool companies in 4 states starting in 1988, what I know about pools could fill a couple of books - what I don't know could fill libraries

  5. #5
    Join Date
    Dec 1969
    Location
    Kentucky
    Posts
    103

    Default Re: a question for the "puck gurus"

    I would agree with other posters - just put the pucks on a dry surface (away from children's reach, or animal's reach).

    Don't put them in a closed container - I'm pretty sure that once they are wet, they will continue to react with the water and gasses may build up in a close container and possible lead to the container rupturing.

    I also think you are about right on the CYA level's for your pool size. I'm back on tabs this year - 2 months so far and no problems. CYA is still in a reasonable range. I usually have to pump enough water out over the winter months that I'm changing out about 1/2 of my water every year. The tabs in my online feeder do a fine job for me

    Good luck

  6. #6
    duraleigh Guest

    Default Re: a question for the "puck gurus"

    Hi, Ted,

    (
    why do you want to raise the cya?)
    I seem to lose about 4ppm each day in this pool (absolute full Sun....I think I might even get some at night!)

    I'll be curious to see if I can cut that loss back by going to 50CYA....maybe even 60. I lose it every winter, anyway.

  7. #7
    waste is offline PF Support Team Whizbang Spinner waste 3 stars waste 3 stars waste 3 stars
    Join Date
    Dec 1969
    Location
    S.E Maine
    Age
    58
    Posts
    1,765

    Default Re: a question for the "puck gurus"

    Quote Originally Posted by duraleigh
    Hi, Ted,

    (I seem to lose about 4ppm each day in this pool (absolute full Sun....I think I might even get some at night!)

    I'll be curious to see if I can cut that loss back by going to 50CYA....maybe even 60. I lose it every winter, anyway.
    Dave, hi, you know what you're doing, so I won't question it further.
    Luv & Luk, Ted

    Having done construction and service for 4 pool companies in 4 states starting in 1988, what I know about pools could fill a couple of books - what I don't know could fill libraries

  8. #8
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: a question for the "puck gurus"

    Dave,
    Yeah, floaters are cheap--an adjustable one is $10-$15. Get one. I don't advise handling wet pucks. The fumes and the acidity could hurt you. With a floater, you can lift the WHOLE thing out, but have a safe place to put it as it can bleach a circle on your deck!
    Carl

+ Reply to Thread

Similar Threads

  1. Newbie just beginning to understand "free" and "total" chlorine. . .
    By Hainsworth in forum Testing and Adjusting Pool Water Chemistry
    Replies: 14
    Last Post: 06-30-2012, 10:17 AM
  2. Can a leaking Jandy "Check Valve" with clear top be "fixed"?
    By 105ex in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-29-2010, 08:17 AM
  3. Changing AG pool depth from 52"-54" to 46"-48" for kids (shallow end tricks)
    By zephans in forum Above-Ground Pool Construction & Repair
    Replies: 9
    Last Post: 06-02-2007, 11:28 AM
  4. " Unattended Puck feeders " & the uninformed
    By RavenNS in forum The China Shop
    Replies: 11
    Last Post: 09-22-2006, 02:00 PM
  5. Esther Williams "Millenium" Pool Install "issue"
    By mrpurrhead in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 06-12-2006, 10:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts