a question for the "puck gurus"

[duraleigh]

First of all, I'd better practice what I preach so here are my current test results:

FC - 4
CC - 0
TC - 4
pH - 7.8
Alk - 110
CYA - 30-35

I would like to lower my pH somewhat (it's trending up) and raise my CYA a little. A friend has given me some tri-chlor tabs.

Since I do not have a chlorinator, I would put these in my skimmers...pump running.

My question is...Would you advise leaving the pucks in the skimmer after I shut off the pump?

If the answer is no, can I simply remove them from the skimmer and place them in a closed, plastic bucket and then put them back when I restart the pump?

Thanks in advance,

[sevver]

When I used to use them I left them in the skimmer when the pump was off with no adverse effects that I ever noticed. I was wondering about the cya dropping off though and needing to use these again to raise it since starting to use bleach.

[let_her_flicker]

Do not leave pucks in your skimmer with pump shut off. The pucks will still dissolve in the water and highly chlorinated water will be in the skimmer now. If some of that water leeches out around the mouth of the skimmer you risk bleaching your liner around the skimmer.

If you have an old, faded liner or don't care if it gets damaged you can leave them in. Personally, I would not do that.

[duraleigh]

Sevver,

You're CYA level will remain pretty constant....probably 'til next Spring.

Flicker,

back to my original question. When you remove them, how do you store them 'til the pump is restarted?

[let_her_flicker]

Dave,

Sorry, I didn't answer your question. I always ran my pump full time when using pucks. I would place the skimmer basket (with pucks) on my plastic top rail if I added bleach (to shock) in the skimmer, and then replaced the basket.

I would assume some dissolving would still occur since the puck is wet. Maybe try putting one in a sealed sandwich bag. If it dissolves you will see it. Secondly, if chlorine gas builds up in the bag it will expand. Just an idea. That is if you are talking about one puck at a time.

When I first joined the forum (about 5 yrs. ago) I asked Ben how much CYA a puck would add to a 16,000 gallone pool and he said "about 1 ppm."



Harry

[waste]

Dave, thanks for posting your #s . I've always told my customers to just pull them out and put them on a plastic lid from one of their old buckets - it saves the deck from bleaching and keeps the tabs close to the skimmer for reinstallation the next day.
(Don't want to start a huge debate but; why do you want to raise the cya?)

[waterbear]

Since I do not have a chlorinator, I would put these in my skimmers...pump running.

My question is...Would you advise leaving the pucks in the skimmer after I shut off the pump?

If the answer is no, can I simply remove them from the skimmer and place them in a closed, plastic bucket and then put them back when I restart the pump?

Thanks in advance,

Dave,
Trichlor has a pH of about 2. If you have a cartridge filter do not place the pucks in the skimmer. Even without one if you turn the pump off the water will become very acidic and it is about the same as pouring acid into the skimmer once the pump is turned back on. Not very good for your pump seals!

Floater are cheap enough. Just get one and put the trichlor in that. Much safer and easier to control how fast they errode. Look for one that has variable adjustment and not one that just has one or two slits or holes spaced aroung it that you can cover or uncover. The Ace Hardware in my area has a pretty good one for under $9!

Just my 2 cents!