I'm not the expert on this forum, but on the Chlor Brite website, it says: "Has a built-in stabilizer (conditioner or cyanuric acid)." As you probably know, cyanuric acid is CYA. Depending on how much you used when you shocked the pool, you may had added the CYA right back in.

I have a high CYA level right now (it's a little over 100). Using only bleach, I've been keeping the free chrloine level at 10 ppm and the water has stayed clear.

You say your chlorine level is 10 ppm. Is that total chlorine or free chlorine?