+ Reply to Thread
Results 1 to 5 of 5

Thread: lake water

Hybrid View

  1. #1
    ivyleager is offline Lifetime Member Weir Watcher ivyleager 0
    Join Date
    Dec 1969
    Location
    North Carolina
    Posts
    149

    Default Re: lake water

    To catch fine particles before they get to the filter, try putting a skimmer sock (pool store or WalMart, pkg of 3 for about $5) or regular panty hose over skimmer basket. This will catch quite a bit of gunk, and will need to be rinsed off several times a day while you're battling the 'Lake Effect'.

    You'll definitely need to raise your chlorine level to at least 15ppm (depending on your CYA levels) and hold it there until water clears. Filter 24/7, clean cartidges as needed.

    Post chemical numbers, and if necessary, get water tested at pool store. But don't let them talk you into buying anything.

    Good luck.

    CaryB
    Go 'Canes!!

  2. #2
    Join Date
    Dec 2004
    Location
    Indiana.
    Posts
    700

    Default Re: lake water

    Your total chlorine being higher than your free chlorine is a problem. It indicates a need to shock. In bad water situations, you need to test and adjust more than once a day. At least three times a day, more if you can.

    To accurately test, you need a liquid reagent kit, not strips.

+ Reply to Thread

Similar Threads

  1. Need Pool Expert Houston-Clear Lake area
    By cvoss in forum In-Ground Pool Construction and Repair
    Replies: 0
    Last Post: 07-31-2006, 02:51 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts