Congrats! You are right, it is POP and persistance. Once you understaind your own pool, and the reasons for the staining, it will be much easier for you to keep ahead of the water. If you have any other questions, feel free to ask.
I would like to thank everyone for all of their help, my pool is almost clear to the deep end and getting better everyday. My advice to anyone with metal problems... be patient and persistant.
Congrats! You are right, it is POP and persistance. Once you understaind your own pool, and the reasons for the staining, it will be much easier for you to keep ahead of the water. If you have any other questions, feel free to ask.
Northeast PA
16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5
Bonni,
Congratulations! Your results are encouraging, and I could use some encouragment right now battleling my own water problems.
Also - I want to appologize for stepping on your post early on. After reading through the post I realized that I used your post to solve my problem. Sorry about that! Glad to hear you could see the light (to the bottom of the pool)!
Revived POP
Intex Blow-up Ring 18x48 round
Cartridge Filter
Not a problem, like I said ... have some patience, I was also at a point where I never thought I would be swimming in a clear pool, but with persistance and staying away from the pool store (Except for the pool magnet) it all worked out and it will for you too.
Bookmarks